User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Description
- 3 Safety Instructions
- 4 Basic Operation
- 5 Alarm Functions
- 6 Messaging
- 7 Navigate the Menu
- 8 Menu Tree
- 9 Menu Operations
- 9.1 Messages
- 9.2 Profiles
- 9.3 Services
- 9.4 Settings
- 9.4.1 Change the Volume
- 9.4.2 Increasing Volume On/Off
- 9.4.3 Vibrator On/Off
- 9.4.4 Message Reminder On/Off
- 9.4.5 Key Beep On/Off
- 9.4.6 Deactivate/Activate Man-down alarm
- 9.4.7 Deactivate/Activate No-movement alarm
- 9.4.8 Deactivate/Activate Pull-cord alarm
- 9.4.9 Set Alarm Data
- 9.4.10 Change the Message Text Size
- 9.4.11 Backlight On/Off
- 9.4.12 Change the Contrast
- 9.4.13 Turn Automatic Key Lock On/Off
- 9.4.14 View Shortcut Keys
- 9.4.15 Select Language
- 9.4.16 Group Numbers
- 9.4.17 Show Time and Date
- 9.4.18 Set Time Format
- 9.4.19 Set Date Format
- 9.4.20 Display System Information
- 9.5 System Test
- 10 Operation Notice
- 11 Maintenance
- 12 Related Documents
- Appendix A: Programming the Transceiver
PRELIMINARY
TD 92417GB
2007-02-19/ Ver. PA
User Manual
Ascom a71 Alarm Tranceiver and Ascom p71 Transceiver
3
Display Icons
The “Audio signal Off” icon is shown when all alert signals,
including ring signal, message tone, key beep etc. are turned off.
High priority messages will however override this setting.
The “Battery” icon is always shown in the display in stand-by mode.
When the level is low it is time to charge the battery.
The “New message” icon appears when a new message is received.
The number on the right side of the icon shows the total number of
unread messages. The symbol will remain until the message is read.
The “Unread message” icon is added in front of not read messages
in the message list.
The “Read message” icon is added in front of read messages in the
message list.
The “Key” icon shows that the keypad is locked.
The “No-movement alarm On” icon shows that the no-movement
alarm is activated.
The “Man-down alarm On” icon shows that the man-down alarm is
activated.
The “Pull-cord alarm On” icon shows that the pull-cord alarm is
activated.
The "Response required" icon is added in front of messages that
requires a response.
The "Response sent" icon is added in front of messages that has
been responded to.
The "Error" icon appers when an error has occured. Service is
needed.
Menu Icons
“Messages”, see 9.1 Messages on page 17 for more information.
“Profiles”, see 9.2 Profiles on page 18 for more information.
“Services”, see 9.3 Services on page 18 for more information.
“Settings”, see 9.4 Settings on page 19 for more information.
!