User's Manual

TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
93
Call Forwarding No Reply Forwards incoming calls to a given number
if the call is not answered or there is no
coverage
Do Not Disturb Sets the handset in busy mode
Call Waiting A second incoming call during a call is
indicated with a call waiting tone
Call Completion Busy Subscriber Notifies the caller when a busy number
becomes available and reinitiates the call.
Only works on H.323
Logout User Logs out the user and the handset
becomes anonymously subscribed.
Clear Local Settings Clears all locally stored feature settings
and all features are deactivated
MWI Mode MWI (Message Waiting Indication) enables
the receiving of a notification from an IP-
PBX when, for example, a voice mail is
available for listening.
There are four modes that can be selected
to enable MWI:
Fixed interrogate and fixed notify number
User dependent interrogate number
User dependent notify number
Both numbers users dependent
"Fixed" means that a common call
number is used for all users.
"User dependent" means that the user’s
own call number is used.
MWI Interrogate Number The number used by the handset when it
checks with the IP-PBX if there are any
message waiting indications to be notified
about.
MWI Notify Number A call number shown in the handset
display when receiving a MWI notification.
To receive the stored message the user dial
the number.
Local Clear of MWI If necessary, enter the number of the
message center in this field to clear the
message waiting indication locally when
dialling the number.
External Idle Display Depending on type of IP-PBX, absence and
call forwarding texts will be displayed on
the handset when idle. Note: If call
forwarding is handled by the IP-PBX, the
following options must be disabled:
Call Forwarding Unconditional
Call Forwarding Busy
Call Forwarding No Reply
Feature Description