User's Manual
Table Of Contents
- 1 Introduction
- 2 Description
- 3 Safety Instructions
- 4 IP Security
- 5 Installation of the Base Station
- 5.1 Base Station Cabling
- 5.2 Install the Base Station
- 5.2.1 Fix the Mounting Bracket to a Wall
- 5.2.2 Fix the Mounting Bracket to a Ceiling
- 5.2.3 Fix the Mounting Bracket to a Pole or Beam
- 5.2.4 Use the Cable Ducts for IPBS1
- 5.2.5 Connect External Antennas (only IPBS2 and DB1)
- 5.2.6 Secure the Cable
- 5.2.7 Pinning
- 5.2.8 Connect the Base Station Cables
- 5.2.9 Mount the Base Station
- 5.3 Power the Base Station
- 6 Installation of the IPBL
- 7 Configuration
- 7.1 Requirements
- 7.2 Access the GUI
- 7.3 GUI Web Access
- 7.4 Configure the Mobility Master
- 7.5 Configure the Standby Mobility Master
- 7.6 Configure the Pari Master
- 7.7 Configure the Standby Pari Master
- 7.8 Configure the Master
- 7.9 Configure the Standby Master
- 7.10 Plug and Play Configuration
- 7.11 Configure the Radio
- 7.12 Configure Deployment
- 7.13 Add Users
- 8 Operation
- 8.1 General
- 8.1.1 Name the IPBS/IPBL
- 8.1.2 Change User Name and Password
- 8.1.3 Centralized Management of Administrator/Auditor Accounts Using Kerberos
- 8.1.4 Configure Automatic Firmware Update
- 8.1.5 Configure the NTP Settings
- 8.1.6 Configure Logging
- 8.1.7 Configure the HTTP settings
- 8.1.8 Configure the HTTP Client settings
- 8.1.9 SNMP
- 8.1.10 Certificates
- 8.1.11 License
- 8.2 LAN
- 8.3 IP
- 8.4 LDAP
- 8.5 DECT
- 8.5.1 Change System Name and Password
- 8.5.2 Set Subscription Method
- 8.5.3 Configure Authentication Code
- 8.5.4 Select Tones
- 8.5.5 Set Default Language
- 8.5.6 Set Frequency Band
- 8.5.7 Enable Carriers
- 8.5.8 Local R-Key Handling
- 8.5.9 No Transfer on Hangup
- 8.5.10 Configure Coder
- 8.5.11 Secure RTP
- 8.5.12 Configure Supplementary Services
- 8.5.13 Select Mode
- 8.5.14 Set Master Id
- 8.5.15 Enable PARI Function
- 8.5.16 Configure Gatekeeper
- 8.5.17 Registration for Anonymous Devices
- 8.5.18 Select Mobility Master Mode
- 8.5.19 Connect Mobilty Master to other Mobility Master(s)
- 8.5.20 Disconnect Mobilty Master from other Mobility Master(s)
- 8.5.21 Connect Master to a Mobility Master
- 8.5.22 Enable the Radio
- 8.5.23 Enter IP Address to the PARI Master and the Standby PARI Master
- 8.5.24 Multiple Radio Configuration
- 8.5.25 PARI
- 8.5.26 SARI
- 8.5.27 Configure Air Synchronization
- 8.6 VoIP
- 8.7 UNITE
- 8.8 Import and Export a Central Phonebook
- 8.9 Users
- 8.10 Device Overview
- 8.11 DECT Sync
- 8.12 Traffic
- 8.13 Gateway
- 8.14 Backup
- 8.15 Software Upgrade
- 8.15.1 Before Upgrading
- 8.15.2 Upgrading Sequence
- 8.15.3 IPBS/IPBL Upgrade
- 8.15.4 Configuration After Updating the Firmware From Software Version 2.x.x to Later
- 8.15.5 Configuration After Updating the Firmware From Software Version 3.x.x to Later
- 8.15.6 System Upgrade from Software Version 4.x.x to 5.0.x
- 8.16 System Downgrade from software version 5.0.x to 2.x.x, from 4.x.x to 2.x.x and from 3.x.x to 2.x.x
- 8.17 System Downgrade from software version 5.0.x to 3.x.x and 4.x.x to 3.x.x
- 8.18 Update
- 8.19 System Upgrade in System with Mobility Masters
- 8.20 Replacing Master Hardware in Multiple Master System
- 8.21 Diagnostics
- 8.22 Reset
- 8.23 Reset Using the Reset Button
- 8.1 General
- 9 Commissioning
- 10 Troubleshooting
- 11 Related Documents
- Document History
- Appendix A: How to Use the Update Server
- Appendix B: RFP Power Consumption
- Appendix C: Local R-Key Handling
- Appendix D: Database Maintenance
- Appendix E: Load Balancing
- Appendix F: Update Script for Configuration of Kerberos Clients
- Appendix G: Install Certificate in the Web Browser
TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
95
1 Select DECT > Master.
2 If this is the Pari Master or standby Pari Master, select the Enable Pari function check
box.
Note: Only one Master per handover and sync domain can have the Pari function
enabled.
3 Reset in order to make the changes take effect, see 8.22 Reset on page 138.
8.5.16 Configure Gatekeeper
The Master need to know the address to the system gatekeeper.
1 Select DECT > Master.
2 Select "H.323", "SIP", "TSIP" or "SIPS" protocol in the Protocol drop-down list.
If H323 protocol is selected, continue with step 3 and 4. Otherwise, jump to step 5.
3 Enter the address to the gatekeeper in the Gatekeeper IP address text field.
4 Enter the address to the alternative gatekeeper in the Alt-Gatekeeper IP address
text field.
NOTE: As an alternative to the Gatekeeper IP Address, the Gatekeeper ID can be
used.
5 NOTE: Step 5 to 7 applies to the SIP, TSIP or SIPS protocols.
SIP uses the UDP protocol, TSIP uses the TCP protocol, and SIPS uses the TLS
protocol.
Enter the IP address or host name and optionally port of proxy (e.g.
proxy1.example.com:5060) to the SIP proxy (registrar) in the Proxy text field.
6 Enter the IP address or host name and optionally port of proxy (e.g.
proxy2.example.com:5060) to the alternative SIP proxy (registrar) in the Alt. Proxy
text field.
7 If used, enter the domain address in the Domain text field.
8 Enter the maximum internal number length in the Max. internal number length text
field.
9 To enable "Enbloc Dialing", select the Enbloc Dialing check box.
With this option enabled the keystrokes on the handsets are buffered in the IPBS/
IPBL for a short period of time before sent to the IP-PBX (use this when the IP-PBX
does not support overlap sending). If disabled the keystrokes are immediately sent
to the IP-PBX.
10 To enable "DTMF through RTP Channel", select the DTMF through RTP channel
check box.
If enabled DTMF is negotiated according to RFC2833/4733, resulting in DTMF digits
being sent as RTP payload directly to the other endpoint. If the other party does not
support RFC2833/4733, there will be fallback to DTMF over the signalling channel
(SIP INFO or H.245)
If disabled, the DTMF is always sent in the signalling channel.
11 To enable "Short disconnect tone", select the Short disconnect tone check box.
With this option enabled, a short tone (i.e. busy tone) is received when the other
party hangs up. If this option is not enabled, busy tones will be received for a longer
period of time.