User's Manual
Table Of Contents
- 1 Introduction
- 2 Description
- 3 Safety Instructions
- 4 IP Security
- 5 Installation of the Base Station
- 5.1 Base Station Cabling
- 5.2 Install the Base Station
- 5.2.1 Fix the Mounting Bracket to a Wall
- 5.2.2 Fix the Mounting Bracket to a Ceiling
- 5.2.3 Fix the Mounting Bracket to a Pole or Beam
- 5.2.4 Use the Cable Ducts for IPBS1
- 5.2.5 Connect External Antennas (only IPBS2 and DB1)
- 5.2.6 Secure the Cable
- 5.2.7 Pinning
- 5.2.8 Connect the Base Station Cables
- 5.2.9 Mount the Base Station
- 5.3 Power the Base Station
- 6 Installation of the IPBL
- 7 Configuration
- 7.1 Requirements
- 7.2 Access the GUI
- 7.3 GUI Web Access
- 7.4 Configure the Mobility Master
- 7.5 Configure the Standby Mobility Master
- 7.6 Configure the Pari Master
- 7.7 Configure the Standby Pari Master
- 7.8 Configure the Master
- 7.9 Configure the Standby Master
- 7.10 Plug and Play Configuration
- 7.11 Configure the Radio
- 7.12 Configure Deployment
- 7.13 Add Users
- 8 Operation
- 8.1 General
- 8.1.1 Name the IPBS/IPBL
- 8.1.2 Change User Name and Password
- 8.1.3 Centralized Management of Administrator/Auditor Accounts Using Kerberos
- 8.1.4 Configure Automatic Firmware Update
- 8.1.5 Configure the NTP Settings
- 8.1.6 Configure Logging
- 8.1.7 Configure the HTTP settings
- 8.1.8 Configure the HTTP Client settings
- 8.1.9 SNMP
- 8.1.10 Certificates
- 8.1.11 License
- 8.2 LAN
- 8.3 IP
- 8.4 LDAP
- 8.5 DECT
- 8.5.1 Change System Name and Password
- 8.5.2 Set Subscription Method
- 8.5.3 Configure Authentication Code
- 8.5.4 Select Tones
- 8.5.5 Set Default Language
- 8.5.6 Set Frequency Band
- 8.5.7 Enable Carriers
- 8.5.8 Local R-Key Handling
- 8.5.9 No Transfer on Hangup
- 8.5.10 Configure Coder
- 8.5.11 Secure RTP
- 8.5.12 Configure Supplementary Services
- 8.5.13 Select Mode
- 8.5.14 Set Master Id
- 8.5.15 Enable PARI Function
- 8.5.16 Configure Gatekeeper
- 8.5.17 Registration for Anonymous Devices
- 8.5.18 Select Mobility Master Mode
- 8.5.19 Connect Mobilty Master to other Mobility Master(s)
- 8.5.20 Disconnect Mobilty Master from other Mobility Master(s)
- 8.5.21 Connect Master to a Mobility Master
- 8.5.22 Enable the Radio
- 8.5.23 Enter IP Address to the PARI Master and the Standby PARI Master
- 8.5.24 Multiple Radio Configuration
- 8.5.25 PARI
- 8.5.26 SARI
- 8.5.27 Configure Air Synchronization
- 8.6 VoIP
- 8.7 UNITE
- 8.8 Import and Export a Central Phonebook
- 8.9 Users
- 8.10 Device Overview
- 8.11 DECT Sync
- 8.12 Traffic
- 8.13 Gateway
- 8.14 Backup
- 8.15 Software Upgrade
- 8.15.1 Before Upgrading
- 8.15.2 Upgrading Sequence
- 8.15.3 IPBS/IPBL Upgrade
- 8.15.4 Configuration After Updating the Firmware From Software Version 2.x.x to Later
- 8.15.5 Configuration After Updating the Firmware From Software Version 3.x.x to Later
- 8.15.6 System Upgrade from Software Version 4.x.x to 5.0.x
- 8.16 System Downgrade from software version 5.0.x to 2.x.x, from 4.x.x to 2.x.x and from 3.x.x to 2.x.x
- 8.17 System Downgrade from software version 5.0.x to 3.x.x and 4.x.x to 3.x.x
- 8.18 Update
- 8.19 System Upgrade in System with Mobility Masters
- 8.20 Replacing Master Hardware in Multiple Master System
- 8.21 Diagnostics
- 8.22 Reset
- 8.23 Reset Using the Reset Button
- 8.1 General
- 9 Commissioning
- 10 Troubleshooting
- 11 Related Documents
- Document History
- Appendix A: How to Use the Update Server
- Appendix B: RFP Power Consumption
- Appendix C: Local R-Key Handling
- Appendix D: Database Maintenance
- Appendix E: Load Balancing
- Appendix F: Update Script for Configuration of Kerberos Clients
- Appendix G: Install Certificate in the Web Browser
TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
127
3 Click "Save" in the dialogue window and browse to the place where the
configuration should be saved.
4 Click "Save".
8.15 Software Upgrade
Note: In software version 5.0.x:
The RFP version information is not displayed in the IPBS2 GUI. RFP software is more
integrated now and this information becomes obsolete. In IPBS1 the RFP software has a
separate flash memory, but this is not the case for IPBS2. On the IPBS1 the RFP version is
still displayed.
8.15.1 Before Upgrading
1 For safety, take a backup of the configuration parameters for the Master and
Standby Master.
2 Make a note of the Master and Standby Master IP address.
On the device configured as Master, continue with step 3 to 6 below.
3 When upgrading from software version 2.x.x to later: Select DECT > SMS and make
a note of the IMS3 IP address.
4 When upgrading from software version 2.x.x to later: Select DECT > Master and
make a note of the SIP proxy (registrar) IP address, found in the Gatekeeper IP
Address text field.
5 When upgrading from software version 2.x.x to later: Select DECT > Master and
make a note of the alternative SIP proxy (registrar) IP address, found in the Alt.
Gatekeeper IP Address text field.
8.15.2 Upgrading Sequence
The best order is to start with the firmware and boot file upgrade of the Standby Master,
then the Master, then all Radios, then do the configuration changes. This way the Radios
will not be able to connect to the Master or Standby Master with incompatible firmware.
The upgrading sequence is as follows:
1 Upgrade firmware and boot file of Standby Master, see 8.15.3 IPBS/IPBL Upgrade.
2 Upgrade firmware and boot file of Master, see 8.15.3 IPBS/IPBL Upgrade.
3 Upgrade firmware and boot file of Radios, see 8.15.3 IPBS/IPBL Upgrade.
4 When upgrading from software version 2.x.x to later: Update configuration of
Radios, see
8.15.4 Configuration After Updating the Firmware From Software
Version 2.x.x to Later.
5 When upgrading from software version 2.x.x to later: Update configuration of
Master, see
8.15.4 Configuration After Updating the Firmware From Software
Version 2.x.x to Later.
6 When upgrading from software version 2.x.x to later: Update configuration of
Standby Master, see
8.15.4 Configuration After Updating the Firmware From
Software Version 2.x.x to Later.
7 When upgrading from software version 3.x.x to later: Update configuration of
Master and Standby Master, see
8.15.5 Configuration After Updating the Firmware
From Software Version 3.x.x to Later.