User's Manual
Table Of Contents
- 1 Introduction
- 2 Description
- 3 Safety Instructions
- 4 IP Security
- 5 Installation of the Base Station
- 5.1 Base Station Cabling
- 5.2 Install the Base Station
- 5.2.1 Fix the Mounting Bracket to a Wall
- 5.2.2 Fix the Mounting Bracket to a Ceiling
- 5.2.3 Fix the Mounting Bracket to a Pole or Beam
- 5.2.4 Use the Cable Ducts for IPBS1
- 5.2.5 Connect External Antennas (only IPBS2 and DB1)
- 5.2.6 Secure the Cable
- 5.2.7 Pinning
- 5.2.8 Connect the Base Station Cables
- 5.2.9 Mount the Base Station
- 5.3 Power the Base Station
- 6 Installation of the IPBL
- 7 Configuration
- 7.1 Requirements
- 7.2 Access the GUI
- 7.3 GUI Web Access
- 7.4 Configure the Mobility Master
- 7.5 Configure the Standby Mobility Master
- 7.6 Configure the Pari Master
- 7.7 Configure the Standby Pari Master
- 7.8 Configure the Master
- 7.9 Configure the Standby Master
- 7.10 Plug and Play Configuration
- 7.11 Configure the Radio
- 7.12 Configure Deployment
- 7.13 Add Users
- 8 Operation
- 8.1 General
- 8.1.1 Name the IPBS/IPBL
- 8.1.2 Change User Name and Password
- 8.1.3 Centralized Management of Administrator/Auditor Accounts Using Kerberos
- 8.1.4 Configure Automatic Firmware Update
- 8.1.5 Configure the NTP Settings
- 8.1.6 Configure Logging
- 8.1.7 Configure the HTTP settings
- 8.1.8 Configure the HTTP Client settings
- 8.1.9 SNMP
- 8.1.10 Certificates
- 8.1.11 License
- 8.2 LAN
- 8.3 IP
- 8.4 LDAP
- 8.5 DECT
- 8.5.1 Change System Name and Password
- 8.5.2 Set Subscription Method
- 8.5.3 Configure Authentication Code
- 8.5.4 Select Tones
- 8.5.5 Set Default Language
- 8.5.6 Set Frequency Band
- 8.5.7 Enable Carriers
- 8.5.8 Local R-Key Handling
- 8.5.9 No Transfer on Hangup
- 8.5.10 Configure Coder
- 8.5.11 Secure RTP
- 8.5.12 Configure Supplementary Services
- 8.5.13 Select Mode
- 8.5.14 Set Master Id
- 8.5.15 Enable PARI Function
- 8.5.16 Configure Gatekeeper
- 8.5.17 Registration for Anonymous Devices
- 8.5.18 Select Mobility Master Mode
- 8.5.19 Connect Mobilty Master to other Mobility Master(s)
- 8.5.20 Disconnect Mobilty Master from other Mobility Master(s)
- 8.5.21 Connect Master to a Mobility Master
- 8.5.22 Enable the Radio
- 8.5.23 Enter IP Address to the PARI Master and the Standby PARI Master
- 8.5.24 Multiple Radio Configuration
- 8.5.25 PARI
- 8.5.26 SARI
- 8.5.27 Configure Air Synchronization
- 8.6 VoIP
- 8.7 UNITE
- 8.8 Import and Export a Central Phonebook
- 8.9 Users
- 8.10 Device Overview
- 8.11 DECT Sync
- 8.12 Traffic
- 8.13 Gateway
- 8.14 Backup
- 8.15 Software Upgrade
- 8.15.1 Before Upgrading
- 8.15.2 Upgrading Sequence
- 8.15.3 IPBS/IPBL Upgrade
- 8.15.4 Configuration After Updating the Firmware From Software Version 2.x.x to Later
- 8.15.5 Configuration After Updating the Firmware From Software Version 3.x.x to Later
- 8.15.6 System Upgrade from Software Version 4.x.x to 5.0.x
- 8.16 System Downgrade from software version 5.0.x to 2.x.x, from 4.x.x to 2.x.x and from 3.x.x to 2.x.x
- 8.17 System Downgrade from software version 5.0.x to 3.x.x and 4.x.x to 3.x.x
- 8.18 Update
- 8.19 System Upgrade in System with Mobility Masters
- 8.20 Replacing Master Hardware in Multiple Master System
- 8.21 Diagnostics
- 8.22 Reset
- 8.23 Reset Using the Reset Button
- 8.1 General
- 9 Commissioning
- 10 Troubleshooting
- 11 Related Documents
- Document History
- Appendix A: How to Use the Update Server
- Appendix B: RFP Power Consumption
- Appendix C: Local R-Key Handling
- Appendix D: Database Maintenance
- Appendix E: Load Balancing
- Appendix F: Update Script for Configuration of Kerberos Clients
- Appendix G: Install Certificate in the Web Browser
TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
145
Fan failure (TAM) 0x000f0010 IPBL X
Synchronization ring broken (Sync) 0x00100001 IPBL X
Reference synchronization signal lost (Sync) 0x00100002 IPBL X
Synchronization lost (Sync) 0x00100004 IPBL X
Unsynchronized to reference (Sync) 0x00100008 IPBL X
Interface down (ipproc) 0x00110000 IPBS/IPBL X
Interface not configured (ipproc) 0x00110001 IPBS/IPBL X
DHCP server not responding (ipproc) 0x00110002 IPBS/IPBL X
Invalid UDP-RTP port base/range (ipproc) 0x00110019 IPBS/IPBL X
Invalid UDP-NAT port base/range (ipproc) 0x0011001a IPBS/IPBL X
Invalid NAT port base/range (ipproc) 0x0011001b IPBS/IPBL X
ARP poisoning detected (ipproc) 0x00110041 IPBS/IPBL X
Out of TCP/NAT ports (ipproc) 0x00110046 IPBS/IPBL X
Out of TCP ports (ipproc) 0x00110047 IPBS/IPBL X
TCP bind error (ipproc) 0x00110049 IPBS/IPBL X
Out of UDP/RTP ports (ipproc) 0x00110050 IPBS/IPBL X
Out of UDP ports (ipproc) 0x00110051 IPBS/IPBL X
UDP bind error (ipproc) 0x00110053 IPBS/IPBL X
No route to destination (ipproc) 0x0011005a IPBS/IPBL X
No route to destination, if down (ipproc) 0x0011005b IPBS/IPBL X
No route to destination, if unknown (ipproc) 0x0011005c IPBS/IPBL X
No route to destination, if unconfigured (ipproc) 0x0011005d IPBS/IPBL X
No route to destination, no gateway (ipproc) 0x0011005e IPBS/IPBL X
No route to destination, loop (ipproc) 0x0011005f IPBS/IPBL X
Memory Low (box) 0x00120001 IPBS/IPBL X
Radio busy for speech (Dect) 0x00140001 IPBS X
Busy for speech (CLU) 0x00150001 IPBL X
Failed to transfer Unite communication block
(Unite)
0x001a0001 IPBS/IPBL X