User's Manual

TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
48
3 Enter user name and password for a system administrator.
4 Click "OK" to login.
Following tasks can be done:
•Managing the default system admin
istrator account, see The Default System
Administrator Account on
page 48.
•Managing additional system administrator accounts, see A
dditional Administrator
Accounts o
n page 48.
The Default System Administrator Account
The default system administrator account can be mod
ified but cannot be deleted. To
modify the default system administrator account, do as follows:
1 Login as system administrator (see Log in as System Administrator).
2 Select General > Admin.
3 Select/Enter the following settings:
Field name Description
• Device Name Enter a description for the device.
• User Name Enter a login user name.
• Password Enter a password.
• Confirm Password Confirm the password.
Note: Only
changing the password will not result in the settings being saved. For
the settings to be saved, both user name and password must be updated at the
same time!
4 Click "OK".
Additional Administrator Accounts
Note: T
o create additional administrator accounts, Kerberos must have been configured
(see 8.1.3 C
entralized Management of Administrator/Auditor Accounts Using Kerberos on
page 61).
To create an additional administrator acco
unt, do as follows:
1 Log in as system administrator (see Lo
g in as System Administrator on page 47).
2 Select General > Kerberos
3 On the next free account r
ow in the Users section:
• Enter User Name
• Enter Password
• Enter Password again
• Select Ad
ministrator (for System Administrator) or Auditor in the drop-down list
(See 7.3.2 Access Lev
els on page 46 for a description of access levels.)
4 Click "OK".
The account row is created.
To modify an additional administrator acco
unt, do as follows:
1 Log in as system administrator (see Lo
g in as System Administrator on page 47).
2 Select General > Kerberos