User's Manual

TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
49
3 On an existing account row in the Users section::
• Enter a new user name
• Enter a new password
• Enter the password again
• Select Administrator (for System Administrator) or Auditor in the drop-down list
(See
7.3.2 Access Levels on page 46 for a description of access levels.)
4 Click "OK".
The account row is updated.
To delete an additional administrator account, do as follows:
1 Login as system administrator (see Log in as System Administrator on page 47).
2 Select General > Kerberos
3 On the row to be deleted, select the Delete check box.
4 Click "OK".
The account row is deleted.
Managing User Administrators
Create a User Administrator
IPBS/IPBL is not supplied with preinstalled user administration accounts. Therefore, the first
user administration account must be created by a system administrator. If additional user
administration accounts are needed they must also be created by a system administrator.
1 Log in as System Administrator (see Log in as System Administrator on page 47).
2 Select "Users".
3 Click "show" .
The User Administration page (see figure 21 on page 47 for a sample) is displayed.
4 Click "new".
5 Select the "User Administrator" radio box. The window layout transforms.
6 Enter a long name.
7 Enter a name (NOTE: This field is used for login).
8 Enter a password.
9 Confirm the password.
10 Click "OK".
View and Modify a User Administrator
1 Login as System Administrator (see 7.3.5 System Administrators on page 47).
2 Select "Users".
3 Click "show".
A two-part list page is displayed. At the top are the user administrator accounts and
below the user administrators are the user accounts, both listed in alphabetical
order.
4In the User Administrators section, click the hyperlink to be edited below the Long
Name heading. An Edit User window is opened.