User's Manual

TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
56
Note: Display Name is only used during (AD) replication, see Attribute Mappings on page
85.
7.13.1 Anonymous Registration
Anonymous Registration is done in two steps. First, the user is registered in the IP-DECT
System. Second, the handset is assigned to the
user from the handset.
Add users in the IP-DECT System
1 Under Adm
inistration, select "Users".
2 Click "New".
3 Enter the following information in the co
rresponding text fields, leave the IPEI / IPDI
text field empty, do not remove the automatically generated Auth. Code:
Field name Description
Max.
characters
• Long Name Mandatory, the name of the user, need to be unique
t
hroughout the system.
30
• Display Name Optional and only available when using the Ascom
V
oIP Gateway, the calling or called party name will
be shown in the handset display (depending on
whose handset).
30
• Name Optional, the user name. 30
• Number Mandatory, the phone number extension, need to be
un
ique throughout the system.
30
• Password Optional, is used for registration towards the
gate
keeper.
30
• Idle Display Optional, will be shown in the ha
ndset display when
the handset is idle.
47
4 Click "OK".
5 Repeat step 2 to 4 for all users.
Assign Handsets to Users
1 Select DECT > System.
2In the Sub
scriptions drop-down list, select "With System AC" to enable anonymous
registration. Click "OK".
3 Perform an "over air subscription" using the system Authentication Code. For
in
formation on how this is done, see the reference guide of the handset.
The handset IPDI number appears in the Anonymous
list. To view the list: Select
Users > Anonymous.
4 Assign the handset to any user, subscribed or unsubscribed, on any Master defined
i
n the system by calling the desired Master id & extension & optional individual AC
code and hang up.
Example where 0 is the
Master id, 200 is the extension and 1234 is the AC code:
*0*200*1234#. If 200 is occupied by another handset, the new handset will be
assigned this identity and the old handset will be moved to the anonymous list
when logging in the new handset.
NOTE: When using AC code, start with * and
end with # character. Otherwise skip
the *# characters.