User's Manual

PRELIMINARY
TD 92476GB
2008-06-12/ Ver. PA11
User Manual
Cordless Telephone DT390
19
6 Calling
6.1 Open the Call List
The 25 last received, dialled or missed calls are stored in a call list.
Press the call list. Step with and select one of the numbers.
If a number occurs more than once, the last time stamp, together with the total number
of occurrences, is shown. Press the soft key "Call" to dial.
The call list can also be accessed via the Calls info menu, see 7.1 Calls on page 24.
6.2 Incoming Call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, give you notice
of a call. Ring signal and vibrator can be disabled. The calling party’s phone number and/or
name is shown. The name will be shown if the calling party’s phone number is stored in
the local phonebook. Press to answer the call. When a headset is connected to the
handset, the answering button on the headset can be used to answer the call.
Other answering behaviours can also be set in the Settings menu. The answering
behaviours are Automatically, and Loudspeaking, see 7.3.6 Answering on page 30.
6.2.1 Answer a Call
When the signal sounds, press to answer the call, or press the Soft key to
answer the call in loudspeaking mode. The name/number of the calling party is displayed
if calling line information is available.
6.2.2 End a call
Press to end the call. The duration of the call is shown in the display. The total time
of the call can also be retrieved from the Calls menu > Call time.
6.3 Outgoing Call
6.3.1 Pre-Dial
Enter the number and press to get the line. The number is shown on the display
while dialling. If needed, you can press the soft key "Clear" to erase the number. By using
the navigation key it is possible to step and add/delete a digit in the middle of a
number.
It is possible to turn on/off the tone sender in a pre-dialled number by making a long press
on the *-key.
6.3.2 Dial a Number from the Call list
1 Press the , select a number and press the same key or Soft key "Call" to dial.
The number can be edited before the call is started. Press "More" and select
"Edit number".