User's Manual

PRELIMINARY

TD 92476GB

2008-06-12/ Ver. PA11

User Manual

Cordless Telephone DT390

7.3.5 Phone Lock settings

Activate the Automatic Key lock

1 Select “Locks”.

2 Select "Automatic key lock".

3 Select "On" for activation of automatic key lock.

Activate the Phone Lock

The phone can be protected for unauthorized use. If this function is activated a PIN code

has to be entered at power on, or when the handset is placed in a charger - this behaviour

will first be activated when the handset is placed in the charger. The default phone lock

code (0000) can be changed to any 4 -8 digit personalized code, this is done in the PDM.

1 Select “Locks”.

2 Select “Auto phone lock”.

3 Select “On”, or "On in charger".

4 Enter PIN code

5 Press "OK".

Deactivate the Phone Lock

1 Select “Locks”.

2 Select “Auto phone lock”.

3 Select “Off”.

4 Enter PIN code

5 Press "OK".

Change PIN code

1 Select "Change PIN code".

2 Enter the old PIN code.

3Press "OK".

4 Enter the new PIN code.

5 Press "OK" and enter the new PIN code again.

6 Press "Save".

7.3.6 Answering

The default setting for the phone is to use the Off-hook key when answering a call. The

answering behaviour can be configured to answer the call automatically, i.e. without

pressing a key, or/and in loudspeaking mode. It is also possible to set the answering

behaviour to any key or hook-off.

Note: The automatically answer mode is only relevant when a headset is connected.

Enter in the menu, see 4.3 Settings menu on page 16. Select “Answering”.