User's Manual

TD 92474GB
2008-09-16/ Ver. PB1
User Manual
Cordless Telephone DT690 With Bluetooth
30
6.4.8 Transfer a Call
A new call is started during conversation, the first call is on hold.
Press the soft key "More", and select "Transfer"
2
. Press "Select". This will connect the
first caller with the person you want to transfer the call to.
6.4.9 Transfer to new Call
Press the soft key "More" during the call, and select "Transfer to new call"
2
. Press
"Select".
Dial the number to the person you want to transfer the call to. Press to transfer the
call.
6.4.10 Conference Call
A new call is started during conversation, the first call is on hold.
To connect a conference call, press the soft key "More" and select "Conference call"
2
.
Press "Select".
The person initiating the conference call is the conference leader, and the other are
participant members of the conference call.
6.4.11 Call Back
To enable call back when a call is made to a busy telephone, and to be altered when the
telephone is free; Press the soft key "More" during the call, and select "Call back"
2
. Press
"Select".
Press and wait until the telephone alerts. When the telephone alerts, press
and the
call will automatically be started.
6.4.12 Call Waiting
During a call and the line is busy, press the soft key "More", and select "Call waiting"
2
.
Press "Select". The other part will get a "Call waiting" signal.
When the line is free it will automatically call the number again. This is system dependent.
6.4.13 DTMF
Press the soft key "More" during the call, and select "DTMF". Press "Select". This will
enable the use of Dual Tone Multi Frequency (DTMF) signals.
6.5 Loudspeaking Function
An incoming call can be connected with loudspeaking function active by pressing left Soft
key. During a call, a press on the left Soft key activates the loudspeaking function. Press
the left Soft key again to turn it off.
You can also activate this function by selecting another answering method, see 8.8.5
Answering on page 49.