User's Manual

TD 92474GB

2008-09-16/ Ver. PB1

User Manual

Cordless Telephone DT690 With Bluetooth

7.2.7 Save Number

Enter “Messaging” in the menu, see 4.4 Messaging on page 22, and select "Inbox" >

message >"View". Press "More" and select "Save number". Select "Work number"/

"Mobile number"/"Other number". Add name and press "OK". Add number and press

"OK" and then press "Save". The number will be saved in the contact list. See 8.7.2 Add

Contact on page 45.

7.2.8 Write and Send a Message

Enter “Messaging” menu, see 4.4 Messaging on page 22, and select “Write new

message”. Write the message. Keys 0-9, * or # can be used. Key 0 and 1 contains special

characters, see 3.5 Alphanumeric Keys on page 18 to see all characters.

The maximum message length is 160 characters.

Note: Some characters require 2 bytes in the final message, therefore the user will

sometimes not be able to enter 160 characters.

The first character entered will be an upper level character followed by lower level

characters unless the * -key is pressed before entering the character.

When pressing a key, the first available character on that specific key is displayed, see 3.5

Alphanumeric Keys on page 18. To get any of the other characters on that key, press the

key until that character appears in the display.

Example: to get the character E, press key 3 twice. "E" appears in the display and is

selected after a timeout or when another key is pressed.

To delete a character, press "Clear".

Press "Send", enter the call number and press "Send" to send the message.

7.2.9 Open a Sent Message

Enter “Messaging” menu, see 4.4 Messaging on page 22. Select “Sent” and select

message. Press "View" to read the message.

7.2.10 Send to Another Destination

Enter “Messaging” menu, see 4.4 Messaging on page 22. Select “Inbox” or "Sent" and

select message. Press "More", and select "Forward", then press "Send". Enter the

number and press "Send".

7.3 Voice Mail

7.3.1 Receive a Voice Mail

A new voice mail is indicated by new message icon in the status bar. Information is

stored in the “Messaging” inbox, see 4.4 Messaging on page 22. The Voice Mail is dialled

by a long press on digit key "1" in Idle mode, or from the Inbox menu.

7.3.2 Check the Voice Mail inbox

Enter “Messaging” menu, see 4.4 Messaging on page 22, and select “Inbox”. The voice

mail will be displayed first in the inbox list, select icon "Voice Mail", press "View",

and then "Call".