User's Manual

PRELIMINARY
TD 92474GB
2008-06-12/ Ver. PA15
User Manual
Cordless Telephone DT690 With Bluetooth
27
6 Calling
6.1 Open the Call List
The 25 last received, dialled or missed calls are stored in a call list.
Press to open the call list. Step with and select one of the numbers.
If a number occurs more than once the last time stamp, together with the total number of
occurrences, is shown. Press the soft key "Call" to dial.
The call list can also be accessed via the Calls info menu, see 8.2 Calls on page 37.
6.2 Incoming Call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, give you notice
of a call. Ring signal and vibrator can be disabled. The calling party’s phone number or
name is shown. The name will be shown if the calling party’s phone number is stored in
the local phonebook. Press the Off-hook key to answer the call. When a headset is
connected to the handset, the answering button on the headset can be used to answer
the call.
Other answering methods can also be set in the Settings menu, see 4.8 Settings on page
24. The answering methods are; Automatically and Loudspeaking.
When “Automatically” is enabled, all incoming calls will be connected automatically.
6.2.1 Answer a Call
When the signal sounds press to answer the call, or press the Soft key to
answer the call in loudspeaking mode. The name/number of the calling party is displayed
if calling line information is available.
6.2.2 End a call
Press end the call. The duration of the call is shown in the display. The total time of
the call can also be retrieved from the Calls menu > Call time.
6.3 Outgoing Call
6.3.1 Pre-Dial
Enter the number and press to get the line. The number is shown on the display
while dialling. If needed, you can press the Soft key "Clear" to erase the number. By using
the navigation key it is possible to step and add/delete a digit in the middle of a number.
It is possible to turn on the tone sender in a pre-dialled number by making a long press on
the *-key.
6.3.2 Dial Using a Pre-programmed Hot key, Soft key or Multifunction button
A Hot key, Soft key or Multifunction button can be programmed with a telephone
number. Press the pre-programmed Hot key, Soft key or multifunction button to dial the
number. The call will automatically be connected.