User's Manual

PRELIMINARY

TD 92474GB

2008-06-12/ Ver. PA15

User Manual

Cordless Telephone DT690 With Bluetooth

7 Messaging

7.1 Message List

The thirty last received messages are stored in a list. The message list is located in the

Messaging menu "Inbox". Time and date information is included in the message.

7.2 Receive a Message

When a text message is received, the LED starts flashing and the message alert signal

sounds. The “New message“ icon, and a text with information of received message are

displayed. The icon will remain in the display until all new messages are opened. If the

message is received during a call a beep notifies the user.

The message can be read by selecting "Yes". It is possible to reply, forward the message,

call the sender, and call number in text. It is also possible to read the message later by

selecting "No". The message will in both cases be stored in the Inbox.

7.2.1 Read a Stored Message

Enter “Messaging” in the menu, see 4.4 Messaging on page 22, and select “Inbox”.

Select stored message, and press "View" to read the message.

7.2.2 Reply to a Message

To reply when receiving a message, press "Yes", see 4.4 Messaging on page 22. Press

“Reply”, enter message, press "Send", enter number, and press "Send" again. See 7.2.8

Write and send a Message.

7.2.3 Delete Message(s)

Enter “Messaging” in the menu, see 4.4 Messaging on page 22, and select "Inbox",

select message to delete and press "More". Select "Delete" and press "Yes" for

confirmation. The Message is deleted. To delete all messages in the list, select "Delete all"

and press "Yes" for confirmation.

7.2.4 Forward a Message

Enter “Messaging” in the menu, see 4.4 Messaging on page 22, and select "Inbox" >

message >"View". Press "More" and select "Forward", write additional text, see 7.2.8

Write and send a Message. Press "Send", enter number, and press "Send" to forward the

message.

7.2.5 Call the Sender of the Message

Enter “Messaging” in the menu, see 4.4 Messaging on page 22, and select "Inbox",

select message and press "More". Select "Call sender".

7.2.6 Call a telephone number included in a Message

If the sender has written a telephone number in the message it is possible to call the

number without dialling it. Select "View" > "More" > select “Call (No. in text)”, and

select "Call".