User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety Instructions
- 3 Descriptions
- 4 Basic Operation
- 5 Menu Tree
- 6 Calling
- 6.1 Incomming Call
- 6.2 Outgoing Call
- 6.2.1 Pre-Dial
- 6.2.2 Post-Dial
- 6.2.3 Dial Using a Pre-programmed Hot/Soft/Navigation Key or Multifunction Button
- 6.2.4 Dial a Number from the Call list
- 6.2.5 Dial the Sender of a Message
- 6.2.6 Dial a Number from the Local Phonebook
- 6.2.7 Dial a Number from the Company Phonebook
- 6.2.8 Dial a Name from the Central Phonebook
- 6.3 During a Call
- 6.3.1 Adjust the Volume during a Call
- 6.3.2 Open Contacts during the Call
- 6.3.3 Turn the Microphone on/off during a Call
- 6.3.4 Start a New Call during Conversation
- 6.3.5 Switch between Calls
- 6.3.6 End a Call
- 6.3.7 Transfer a Call
- 6.3.8 Transfer to new Call
- 6.3.9 Conference Call
- 6.3.10 Call Back
- 6.3.11 Call Waiting
- 6.3.12 DTMF
- 6.3.13 DECT Info
- 6.4 Loudspeaking Function
- 6.5 Call Diversion
- 6.6 Additional Call Services
- 7 Menu Operations
- 8 Enhanced Messaging
- 9 Advanced Functions
- 10 Operation Notice
- 11 System Handling
- 12 Maintenance
- 13 Troubleshooting
- 14 Related Documents
- 15 Document History
- Index
PRELIMINARY
TD 92643GB
30 September 2010 / Ver. PA4
User Manual
Cordless Telephone 3740 for Avaya
44
7Press "OK".
8 Select "Work Number", "Mobile number", or "Other number".
9 Press "Add".
10 Enter phone number. It is possible to add a tone "T" or pause "P" in phone numbers
by pressing the Space key 5 times or 7 times, respectively.
Tip: It is possible to add a variable/character U in the Work/Mobile/Other number
field that allows the user to enter additional numerical character(s) before calling the
number. See 9.1 Procedure Call on page 61 for more information.
11 Press "OK".
12 Press "Save".
Different ring signals can be set to distinguish this contact from another contact by
selecting "Ring signal".
Add from Call List
1 Enter the menu by pressing "Menu"
2 Select "Contacts" in the menu.
3 Select "Add contact".
4 Select "From call list".
5 Select number in the list.
6 Press "Add".
7 Select Work Number", "Mobile number", or "Other number".
8 Press "Select".
9 Press "Add".
10 Enter name.
11 Press "OK".
12 Press "Save".
7.3.3 Edit Contact
Note: It is not possible to edit a company phonebook contact. The contacts are indicated by
a icon in front of the name.
1 Press "Menu".
2 Select "Contacts" in the menu.
3 Select "Edit contact".
4 Select contact.
5 Press "Edit".
6 Select "Name", "Work number", "Mobile number", "Other number", or "Ring signal".
7 Press "Edit".
8 Enter new name/number, and/or select new ring signal.
Tip: It is possible to add a variable/character U in the Work/Mobile/Other number
field that allows the user to enter additional numerical character(s) before calling the
number. See 9.1 Procedure Call on page 61 for more information.
9Press "OK".
10 Press "Save".