User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety Instructions
- 3 Descriptions
- 4 Basic Operation
- 5 Menu Tree
- 6 Calling
- 6.1 Incomming Call
- 6.2 Outgoing Call
- 6.2.1 Pre-Dial
- 6.2.2 Post-Dial
- 6.2.3 Dial Using a Pre-programmed Hot/Soft/Navigation Key or Multifunction Button
- 6.2.4 Dial a Number from the Call list
- 6.2.5 Dial the Sender of a Message
- 6.2.6 Dial a Number from the Local Phonebook
- 6.2.7 Dial a Number from the Company Phonebook
- 6.2.8 Dial a Name from the Central Phonebook
- 6.3 During a Call
- 6.3.1 Adjust the Volume during a Call
- 6.3.2 Open Contacts during the Call
- 6.3.3 Turn the Microphone on/off during a Call
- 6.3.4 Start a New Call during Conversation
- 6.3.5 Switch between Calls
- 6.3.6 End a Call
- 6.3.7 Transfer a Call
- 6.3.8 Transfer to new Call
- 6.3.9 Conference Call
- 6.3.10 Call Back
- 6.3.11 Call Waiting
- 6.3.12 DTMF
- 6.3.13 DECT Info
- 6.4 Loudspeaking Function
- 6.5 Call Diversion
- 6.6 Additional Call Services
- 7 Menu Operations
- 8 Enhanced Messaging
- 9 Advanced Functions
- 10 Operation Notice
- 11 System Handling
- 12 Maintenance
- 13 Troubleshooting
- 14 Related Documents
- 15 Document History
- Index
PRELIMINARY
TD 92643GB
30 September 2010 / Ver. PA4
User Manual
Cordless Telephone 3740 for Avaya
61
9 Advanced Functions
9.1 Procedure Call
When configuring the functions Call services
1
, In Call menu
1
, Contacts, or a shortcut/
favourite to the Phone call function; the data added in these functions is static. When
entering the data for the function to be used, it is possible to add a variable/character U
that allows the user to enter additional numerical characters before calling the number/
sending the data to a system.
See the following example for more information.
Example of configuration:
A user wants to create a Favourite with the Phone call function. The PBX requires that a
prefix must be added to a phone number. In this case, the user can pre-program the prefix
and then enter the applicable phone number when using the Phone call function.
1 Press "Menu", or the confirmation button.
2 Select "My Favourites".
3 Select "Add new".
4In the Name field, enter "Call no.".
5 Select the function "Phone call".
6In the Number field, enter the prefix to be used followed by the character "U". In this
case, the text string is as follows *21*U. The character U represents an Enter number
dialog where the user can enter the phone number.
7 Press "Save".
When using the function, an Enter number dialog appears, see figure 6. If the user enters
"123" and presses "OK", the number *21*123 will be dialled. Note that no call is established
before the user presses "OK", that is, post-dial.
Figure 6. Enter number dialog.
9.2 Admin Menu
The telephone has a hidden menu for system administrators, see Configuration Manual,
Cordless Telephones 3740/3749 for Avaya, TD 92657GB.
The Admin menu contains:
1.Configuration of this function requires PDM/AIWS.
12:00:00
My Favourites
OK Back
Enter number:
123