User's Manual Part 2

TD 92644GB
26 April 2010/ Ver. B
User Manual
Ascom d81 DECT Handset
68
Note: The option “Delete” is not available for a message with request for answer. An
unacknowledged message can only be deleted from the message list.
10.3 Message Queuing and Message Priority
The default settings is that each message will be displayed without being interrupted by
another message, except if the new message is of higher priority. Messages that are not
shown yet are placed in a queue and the priority and time of reception determine the
position in the queue. There are 9 levels of the priority. 1 is highest priority and 9 is lowest
priority.
If several of the messages have the same priority the message that was received first is
shown first. The total number of messages in the queue and the message list cannot
exceed the total number of characters stored in the handset.
If a new message with a higher priority is received while another message is read, the new
message will replace the old message in the display. The old message will be placed in the
queue. If a new message with equal or lower priority is received while another message is
read, the new message will be placed in the queue. See Figure 10.
It is possible to configure how long a message will be displayed, see Configuration
Manual, Ascom d81 DECT Handset, TD 92674GB..
Figure 10. Figure of how the queue and priority works
Prio 7
14:04
Prio 9
14:01
Prio 9
14:01
Prio 1
14:02
Prio 1
14:02
Prio 4
14:03
Prio 4
14:03
Prio 4
13:58
Prio 7
14:04
Prio 8
13:59
Prio 2
13:59
Current Mess
Prio 2
13:59
Current Mess
New messages
M
ess
age
queue
007