User's Manual Part 2

TD 92644GB

26 April 2010/ Ver. B

User Manual

Ascom d81 DECT Handset

Set the Key Sound

This means that every time a key is used, the handset gives a small sound.

1 Enter the menu by pressing "Menu".

2 Select in the menu.

3 Select “Sound & Alerts”.

4 Select “Key sound”.

5 Select “Silent, “Click”, or “Tone”.

It is possible to listen to the key sound by pressing "Play".

6 Press "Back".

8.7.2 Phone Lock settings

Activate the Automatic Key lock

Note: It is possible to answer/end an incoming call while the keypad is locked. If

configured in the PDM/IMS2, it is also possible to call an emergency call while the keypad

is locked. See Configuration Manual, Ascom d81 DECT Handset, TD 92674GB.

1 Enter the menu by pressing "Menu".

2 Select in the menu.

3 Select “Locks”.

4 Select "Automatic key lock".

5 Select "On" for activation of automatic key lock.

Deactivate the Automatic Key lock

1 Enter the menu by pressing "Menu".

2 Select in the menu.

3 Select “Locks”.

4 Select "Automatic key lock".

5 Select "Off" for deactivation of automatic key lock.

Activate the Phone Lock

The handset can be protected for unauthorized use. If this function is activated a PIN code

has to be entered at power on, or when the handset is placed in a charger - this behaviour

will first be activated when the handset is placed in the charger. The default phone lock

code (0000) can be changed to any 4 -8 digit personalized code.

Note: If configured in the PDM/IMS2, it is possible to call an emergency call while the

handset is locked. See Configuration Manual, Ascom d81 DECT Handset, TD 92674GB.

1 Enter the menu by pressing "Menu".

2 Select in the menu.

3 Select “Locks”.

4 Select "Phone lock".

5 Select “Auto phone lock”.

6 Select “On”, or "On in charger".