User's Manual Part 2

TD 92644GB

26 April 2010/ Ver. B

User Manual

Ascom d81 DECT Handset

Figure 13. Replaceable battery. Unlock the lid and remove the battery according to

the illustration.

13.2 Easy Replacement of Handset

Easy replacement can be used if a handset needs to be replaced due to, for example, a

broken display. The easy replacement procedure is done via the handset display and the

DC4 Advanced Desktop Charger, or the CR3 Rack Charger.

The following settings are replaced during easy replacement:

• DECT registration

• User parameters (including User ID)

• Contacts

• The extension number is assigned to the new handset.

The following settings are not replaced during the easy replacement:

• Call list

•Messages

• Bluetooth pairing list

• License(s)

13.2.1 Before Starting Easy Replacement Procedure

1 Check that both the old handset (that is, the handset to be replaced) and the new

handset (that is, the replacement handset) are of the same device type (d81).

Note: It is possible to perform Easy Replacement between different product licenses (that

is d81 Messenger, and d81 Protector). The new handset’s product license is not replaced

by the old handset’s product license during the procedure

2 Make sure that the handset batteries are charged before starting the easy

replacement procedure.

3 Switch off the new handset by long pressing .

19. A handset’s product license, for example d81 Protector, and/or license dependent functions can be moved to an

unlicensed handset (d81 Messenger) using PDM/IMS2.