User's Manual Part 2

TD 92644GB
26 April 2010/ Ver. B
User Manual
Ascom d81 DECT Handset
76
IMPORTANT: Do not remove the handset while the text "Saving settings. Do not remove
phone from charger" is displayed. It may take several minutes.
IMPORTANT: Do not remove the handset while the text "Restoring settings" is displayed
LED Indications during Easy Replacement
The following table shows the LED indications that are used for the d81 and the charger
during the easy replacement procedure.
4, 5 When the text "Please insert old phone in charger" is displayed, replace the new
handset with the old handset. The handset can either be switched on or off.
Note: If the CR3 Rack Charger is used, the left charging slot must be used for both
handsets.
The handset will be restarted and after a few seconds, the text "Saving settings. Do
not remove phone from charger" appears. The charger LED changes to slow
orange flashing.
6, 7 When the text "Please insert new phone in charger" is displayed, replace the old
handset with the new handset. The text "Restoring settings" is displayed.
8 When the text "Phone successfully replaced. Please remove phone to restart."
appears in the display, remove the handset from the charger. The handset is
automatically restarted.
LED indication Description
Orange, flashing (1 000 ms on, 1 000
ms off)
File transfer during Easy Replacement.
Orange, flashing (100 ms on, 800 ms
off)
“Change phone” indication during Easy
Replacement.
Red, flashing (100 ms on, 800 ms off) Error indication during Easy Replacement. Put
back old portable in charger.
Red, flashing (900 ms on, 100 ms off) Error during Easy Replacement. Service needed
for both portables.