User's Manual Part 2

TD 92644GB
26 April 2010/ Ver. B
User Manual
Ascom d81 DECT Handset
89
B.5 Barcode Reader Operation
B.5.1 Using the Bluetooth Barcode Reader
The procedure on how to use the Bluetooth barcode reader may vary depending on which
type/model that is used. Refer to the manual for the Bluetooth barcode reader. The
following instruction can be used as a guideline.
1 Press the button
24
of the barcode reader to scan a barcode. The barcode reader
may give a beep to confirm that the barcode has been read and sends the
information the handset.
2 When the information is received, the handset sends it immediately to a predefined
destination. A dialog window "Message sent" appears in the handset, and the
barcode reader gives a beep to confirm that the message has been sent.
Note: Only scan one barcode at the time and wait for the message sent
acknowledgement from the handset/barcode reader before scanning a new barcode.
B.6 Menu Tree
See 5.8 Settings on page 27.
B.7 Operation Notice
B.7.1 Accessibility and Voice quality
Bluetooth uses the frequency of 2.45 GHz. WLAN, microwave oven, and other devices
that use the same frequency can disturb the use of a Bluetooth barcode reader.
B.7.2 Operation Area
Maximum distance between the barcode reader and the handset is 10 metres. The
communication distance between the handset and barcode reader may vary considerably
due to the environment and disturbances from other 2.45 GHz equipment. Different
barcode readers can also give different communication distances.
B.7.3 Out of Range
If the Bluetooth barcode reader and the handset get out of range from each other the
connection is lost. The barcode reader must manually be connected again, see B.4.4 Select
a Bluetooth Barcode Reader on page 88.
B.8 Environmental Requirements
B.8.1 Bluetooth Barcode Reader Battery
See the manual for the Bluetooth barcode reader.
24.For intruction, see barcode reader manual.