User's Manual Part 2

TD 92644GB

26 April 2010/ Ver. B

User Manual

Ascom d81 DECT Handset

Edit Alarm Data

Information (for example a handset’s location) can be sent along with an alarm. It is

recommended to create a shortcut for quick access to the "Edit alarm data" menu, see

8.6 Short Cuts on page 53.

1 Enter the menu by pressing "Menu".

2 Select in the menu.

3 Select "Alarm".

4 Select "Edit alarm data".

5 Enter alarm data.

6 Press "Save".

8.8 Connections

8.8.1 Bluetooth

Enable Bluetooth Connection

1 Enter the menu by pressing "Menu".

2 Select in the menu.

3 Select "Bluetooth".

4 Select "Enable". A Bluetooth connection icon will be displayed in the header

bar.

Disable Bluetooth Connection

1 Enter the menu by pressing "Menu".

2 Select in the menu.

3 Select "Bluetooth".

4 Select "Disable".

Connect Bluetooth Headset

This can only be done if Bluetooth connection is enabled and if the Bluetooth headset is in

pairing mode. See Enable Bluetooth Connection and user manual for the Bluetooth

headset.

1 Enter the menu by pressing "Menu".

2 Select in the menu.

3 Select "Bluetooth".

4 Select Headset.

5 Select "Add new". An information text "Put headset in Pairing mode" is displayed.

6 Press "OK". It will now search for a Bluetooth headset for connection.

7 When headset is found, press "Pair".

8 Enter PIN code, see user manual for the Bluetooth headset.

9 Press "OK". "Successful pairing" will be displayed if the pairing mode was

successful.