User's Manual Part 1

TD 92644GB
26 April 2010/ Ver. B
User Manual
Ascom d81 DECT Handset
16
3.2 Accessories
3.2.1 Desktop Chargers
Figure 4. Desktop Chargers for d81 DECT Handset
There are two desktop chargers available; one basic (DC3) that only charges the handset,
and one with advanced functionality (DC4) to download new software and to synchronize
parameters. The handset is fully operational while placed in the charger.
The charger is delivered with a plug-in power supply and is connected into an ordinary
wall socket. For more information, see Installation and Operation Manual, DC4 Advanced
Desktop Charger, TD 92481GB.
Note: Only use the charger within the temperature range of +5° C – +40° C.
IMPORTANT: Only use the provided power supply, see Installation and Operation
Manual, DC4 Advanced Desktop Charger, TD 92481GB.
3.2.2 Rack Charger
The rack charger is used for charging several handsets, to synchronize parameters, and for
software download.
The built in power supply can charge up to six handsets.
See Installation and Operation Manual, CR3 Rack Charger, TD 92480GB.
3.2.3 Clips
Note: It is possible to use the handset without any clip on, see 13.5 Attach Cover for No
Clip on page 78. The belt clips cannot be used if the handset shall be placed in a case. See
3.2.6 Leather Casing on page 17 for more information.
There are two belt clips available:
• Hinge-type clip
To prevent the handset from slipping out of for example pocket or belt, see 13.3
Attach the Hinge-type Clip on page 77.
• Swivel-type clip
To be able to rotate without slipping out from for example pocket or belt, see 13.4
Attach the Swivel-type Clip on page 77.
3.2.4 Security Cord
The security cord is 800 mm long. The security cord is attached directly to the handset.
004
Advanced
Basic