Operation Manual

TD 92319GB
2006-09-22/ Ver. B
User Manual
Ascom i75 VoWiFi Handset
18
4.14 Lock/Unlock the Handset
You can protect your IP handset from being used by others by locking it automatically
when placed in a charger or switched off. The handset can only be unlocked with a 1 to 4
digit code. When the handset is locked, it is still possible to send all types of alarms.
The code is set in the handset’s memory and can be changed from the handset, see 9.5.13
Change the Lock Code
1
on page 40. The handset can also be locked manually, see 9.5.12
Lock the Handset Manually on page 40.
4.15 Shared Phone
The feature shared phone allows more than one user to use a handset. All parameters and
settings that are set in the PDM are loaded to the handset upon logon. Parameters that
are changed in the handset by a logged in user are stored in the PDM. The message and
call lists are deleted when a new user logs on to the handset.
The handsets are configured to be shared using the PDM. When a handset is configured
to be a shared phone it can be used by any shared phone user in the system. The user
profile must have the “personal phone” parameter set to false. If the user is configured as
personal (i.e. not shared) the handset will become a personal phone upon first log on.
4.15.1 Logging On/Off
Log on to the handset following the steps below:
1 Turn on the handset.
2 Enter the username.
3 Enter the password, navigate using the keys.
4Press “Log on”.
To log off:
1 Long press on-hook.
2 Select log off or switch off.
Note: Upon start-up, if the handset does not find the WLAN a “No System” screen is
shown. If the handset does not receive an IP address from the system a “No Access”
screen is shown.