Operation Manual

TD 92319GB
2006-09-22/ Ver. B
User Manual
Ascom i75 VoWiFi Handset
55
Appendix C: Add a New i75 VoWiFi Handset to the Site
The following actions are needed when adding a new i75 VoWiFi Handset:
• Give the handset access to the WLAN appliance, see C.1.
• The user must be added in the Gatekeeper (the PBX application in the VoIP gateway),
see C.2.
• The handset must be configured via the PDM, see C.3.
C.1 Give the Handset Access to the WLAN Appliance
This action is depending on the authentication and encryption used (Open, Radius etc.).
Consult your System Administrator.
In the case of WEP encryption with MAC address authentication make sure to enable
MAC filter (add the handset MAC address).
C.2 Add the User to the Gatekeeper
For the Ascom VoIP Gateway the minimum settings required are:
• Long Name - used for name presentation
•Name
• Number - the endpoint number
C.3 Configure the Handset in the PDM
C.3.1 Recommended working flow:
1 Create the portable and run a template with basic settings. See Installation and
Operation Manual, Portable Device Manager (PDM), Windows version,
TD 92325GB.
2 Connect the portable and associate with the previously created entry.
3 Add the portable(s) in the PDM System version. Run a template with basic settings
created for the site and configure individual settings. See Installation and Operation
Manual, Portable Device Manager (PDM), System version, TD 92378GB.
4 Switch on the handset.
The system might ask for call no. and password the first time the handset logs in.
The password can be the same for all VoWiFi handsets in the system, or individual,
for example for shared phones.
C.3.2 Settings required in the PDM:
• SYSTEM - A
- DHCP mode = Enable - or Phone IP address and Subnet mask
-ESSID
- WEP key n
- WEP transmit key= n
• DEVICE - USER
- Endpoint number - automatically set by PDM