User's Manual
Table Of Contents
- 1 Introduction
- 2 Description
- 3 Installation of the Base Station
- 3.1 Base Station Cabling
- 3.2 Install the Base Station
- 3.2.1 Fix the Mounting Bracket to a Wall
- 3.2.2 Fix the Mounting Bracket to a Ceiling
- 3.2.3 Fix the Mounting Bracket to a Pole or Beam
- 3.2.4 Use the Cable Ducts for IPBS1
- 3.2.5 Connect External Antennas (only IPBS2 and DB1)
- 3.2.6 Secure the Cable
- 3.2.7 Pinning
- 3.2.8 Connect the Base Station Cables
- 3.2.9 Mount the Base Station
- 3.3 Power the Base Station
- 4 Installation of the IPBL
- 5 Related Documents
- Document History
- Appendix A. RFP Power Consumption
TD 92989EN
15 October 2014 / Ver. B
Installation Guide
IP-DECT Base Station & IP-DECT Gateway
36
A.2 BS3x0 and DB1
Table 2 Power consumption (watts) of base stations and cabling when powered from the IPBL
Table 3
Cable
length
(metres)
0.4 mm
wire size
()
0.4 mm
wire size
()
0.5 mm
wire size
()
0.5 mm
wire size
()
0.6 mm
wire size
()
0.6 mm
wire size
()
Without
EPP
With
EPP
Without
EPP
With
EPP
Without
EPP
With
EPP
0 5.0 5.0 5.0 5.0 5.0 5.0
100 5.2 5.1 5.1 5.1 5.1 5.1
200 5.3 5.2 5.2 5.1 5.1 5.1
300 5.6 5.3 5.3 5.2 5.2 5.1
400 5.8 5.5 5.5 5.3 5.3 5.2
500 6.1 5.6 5.6 5.4 5.4 5.2
600 6.5 5.8 5.8 5.5 5.4 5.3
700 7.1 6.0 6.0 5.6 5.5 5.3
800 8.1 6.2 6.2 5.7 5.6 5.4
900 - 6.5 6.5 5.8 5.7 5.4
1000 - 6.9 6.9 5.9 5.8 5.5
1100 - 7.3 7.3 6.1 5.9 5.6
1200 - 8.1 8.1 6.2 6.1 5.6
1300 - - - 6.4 6.2 5.7
1400 - - - 6.6 6.4 5.8
1500 - - - 6.9 6.6 5.8