User's Manual

TD 92579EN
15 October 2014 / Ver. M
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 7.2.X)
77
Store the Syslog Entries using a TCP Connection
1 Select Services > Logging
2 Select "TCP" in the Typ
e drop-down list.
3 Enter the "IP address" of the logging
server in the Address text field.
4 Enter the "Port" of the logging server in the Port text
field.
5 Click "OK".
Store the Syslog Entries in a Syslogd
1 Select Services > Logging.
2 Select “SYSLOG” in the Typ
e drop-down list.
3 Enter the “IP address” o
f the syslogd in the Address text field.
4 Enter the desired syslogd message class in the Class text f
ield.
5 Click “OK”.
Store the Syslog Entries on a Web Server
1 Select Services > Logging.
2 Select “HTTP” or "HTTPS" in the Type dr
op-down list.
3 Enter the IP address in the IP Address text f
ield.
4 Enter the port
in the Port text field.
5 Enter the relative URL of the form program on your web server in the Path text
field.
6 Click “OK”.
Note: T
he IPBS/IPBL will make an HTTP GET request or HTTPS GET request to the web server
on the registered URL followed by the URL-encoded log entry.
Example:
En
ter the value “/cdr/ cdrwrite.asp” in the “URL-Path” field if a page is on the web server
with the name “/cdr/cdrwrite.asp” with a form that expects the log message in the “msg”
parameter. In this example, the IPBS/IPBL will make a GET /cdr/
cdrwrite.asp?event=syslog&msg=logmsg request to the server.
Forward Alarms and Events
It is possible to forward alarms and events to a HTTP
server destination. Typically this can
be a Master base station. This programming can be done in the PARI Master (DECT >
Radio config) or locally as described below.
1 Select Services > Logging.
2 If the HTTP server destination requir
es HTTPS then select "HTTPS" in the Type drop-
down list.
3 Enter the IP Address of the IPBS/IPBL where
you want to have an overview of all
faults in the External HTTP Server Address text field.
4 Enter the HTTP server port in
the External HTTP Server Port text field. The default
value is 80.