User's Manual
Table Of Contents
- 1 Introduction
- 2 Descriptions
- 3 Basic Operation
- 3.1 Switch the Handset On/Off
- 3.2 The Call List
- 3.3 Calling
- 3.4 Start a New Call during Conversation
- 3.5 Transfer a Call/Retrieve the Call
- 3.6 “Blind” Transfer
- 3.7 Turn Off Alert Signals at an Incoming Call
- 3.8 Put a Call on Hold/Retrieve the Call
- 3.9 Turn the Mute Mode Off/On during a Call
- 3.10 Loudspeaking Function
- 3.11 Increase/Decrease the Speaker Volume during a Call
- 3.12 Turn Audible Signals On/Off
- 3.13 Lock/Unlock the Keypad
- 3.14 Lock/Unlock the Handset
- 4 Messaging
- 5 Alarm Operation
- 6 Navigate the Menu
- 7 Menu Tree
- 8 Menu Operation
- 8.1 Contacts
- 8.2 Messages
- 8.3 Call List
- 8.4 Services
- 8.5 Settings
- 8.5.1 Change the Volume
- 8.5.2 Change the Ring Signal
- 8.5.3 Vibrator On/Off
- 8.5.4 Key Beep On/Off
- 8.5.5 Deactivate/Activate No-movement alarm
- 8.5.6 Deactivate/Activate Man-down alarm
- 8.5.7 Edit a Soft key
- 8.5.8 Edit a Hot key
- 8.5.9 Select Language
- 8.5.10 Change Text Size in Messages
- 8.5.11 Lock the Handset Manually
- 8.5.12 Change the Lock Code
- 8.5.13 Time and Date Settings
- 8.5.14 Turn On/Off Automatic Keypad Lock
- 8.5.15 Enable/Disable Quick Answer
- 8.5.16 Set New Messages to be Displayed Upside down
- 8.5.17 Set Owner ID
- 8.5.18 Select System
- 8.5.19 System Information
- 8.6 Profiles
- 8.6.1 Change Profiles
- 8.6.2 Change Profile Settings
- 8.6.3 Set the Profile to Absent On/Off
- 8.6.4 Choose the Profile’s Answering method
- 8.6.5 Set the Profile to Divert incoming Calls to another telephone number
- 8.6.6 Preset the telephone numbers for the Diversions alternatives
- 8.6.7 Customizing the Profiles Menu
- 9 Advanced Functions
- 10 Operation Notice
- 11 Maintenance
- 12 Related Documents
- Appendix A: Programming the Handset
- Index
PRELIMINARY
TD 92319GB
2005-10-20/ Ver. PA11
User Manual
i75 Cordless IP Handset
15
4 Messaging
4.1 Message List
The twenty last received messages are stored in a message list, if the total number of
characters does not exceed 20
000.
4.1.1 Display and Scroll between Messages
All received messages are saved in the message list. Press to enter the message list. Use
to scroll the list. Only one row per message is displayed. Press “Open” to see the
whole message. The identity of the sending handset, and time and date when the
message was received, is shown.
4.1.2 Read a Stored Message
Open the message list by pressing , or from the menu, see 8.2 Messages on page 28.
Navigate in the list with . The selected message is marked. Press “Select” to read
the message. The time and date for the selected message are displayed.
4.2 Basic Message Handling
4.2.1 Receive a Message
A flashing LED, accompanied by a message tone and/or a vibrating handset, gives you
notice of a message. The message tone can be silenced by a press on the Mute button. If
the handset is set in silent mode, the message tone will break trough if the message is
urgent.
The message will be displayed for a preset period of time. The message will be marked as
read if “Close” is pressed, or if a “Reply” is sent.
The text size can be changed, see 8.5.10 Change Text Size in Messages on page 34, and
the message can also be displayed upside down, see 8.5.16 Set New Messages to be
Displayed Upside down on page 35.
4.2.2 Receive a Message during a Call
During a connected call a new message is indicated by a beep. The characteristics of the
beep is the same as the message tone.
Depending on parameter settings in the handset, an urgent message can be permitted to
disconnect the call.
4.2.3 Receive a Message with Request for Answer
A message with request for answer is indicated and viewed the same way as an ordinary
message, see
4.2.1 Receive a Message on page 15, but the text “Acknowledge” is added
to the message. Use the Soft keys to do a positive or negative acknowledgement.
Accept/Reject the message
Press the “Accept” or “Reject”. In the message list an acknowledged message is indicated
by the text “Accepted” or “Rejected”.