User's Manual
Table Of Contents
- 1 Introduction
- 2 Descriptions
- 3 Basic Operation
- 3.1 Switch the Handset On/Off
- 3.2 The Call List
- 3.3 Calling
- 3.4 Start a New Call during Conversation
- 3.5 Transfer a Call/Retrieve the Call
- 3.6 “Blind” Transfer
- 3.7 Turn Off Alert Signals at an Incoming Call
- 3.8 Put a Call on Hold/Retrieve the Call
- 3.9 Turn the Mute Mode Off/On during a Call
- 3.10 Loudspeaking Function
- 3.11 Increase/Decrease the Speaker Volume during a Call
- 3.12 Turn Audible Signals On/Off
- 3.13 Lock/Unlock the Keypad
- 3.14 Lock/Unlock the Handset
- 4 Messaging
- 5 Alarm Operation
- 6 Navigate the Menu
- 7 Menu Tree
- 8 Menu Operation
- 8.1 Contacts
- 8.2 Messages
- 8.3 Call List
- 8.4 Services
- 8.5 Settings
- 8.5.1 Change the Volume
- 8.5.2 Change the Ring Signal
- 8.5.3 Vibrator On/Off
- 8.5.4 Key Beep On/Off
- 8.5.5 Deactivate/Activate No-movement alarm
- 8.5.6 Deactivate/Activate Man-down alarm
- 8.5.7 Edit a Soft key
- 8.5.8 Edit a Hot key
- 8.5.9 Select Language
- 8.5.10 Change Text Size in Messages
- 8.5.11 Lock the Handset Manually
- 8.5.12 Change the Lock Code
- 8.5.13 Time and Date Settings
- 8.5.14 Turn On/Off Automatic Keypad Lock
- 8.5.15 Enable/Disable Quick Answer
- 8.5.16 Set New Messages to be Displayed Upside down
- 8.5.17 Set Owner ID
- 8.5.18 Select System
- 8.5.19 System Information
- 8.6 Profiles
- 8.6.1 Change Profiles
- 8.6.2 Change Profile Settings
- 8.6.3 Set the Profile to Absent On/Off
- 8.6.4 Choose the Profile’s Answering method
- 8.6.5 Set the Profile to Divert incoming Calls to another telephone number
- 8.6.6 Preset the telephone numbers for the Diversions alternatives
- 8.6.7 Customizing the Profiles Menu
- 9 Advanced Functions
- 10 Operation Notice
- 11 Maintenance
- 12 Related Documents
- Appendix A: Programming the Handset
- Index
PRELIMINARY
TD 92319GB
2005-10-20/ Ver. PA11
User Manual
i75 Cordless IP Handset
30
8.3.3 Delete All Numbers in the Call List
1 Mark the Call list icon and press “Select” to enter Call list (this is the same call list
that is reached by pressing
in stand-by mode). The first number in the list is
marked.
2 Press “Options”; “Edit before call” is marked. Mark “Delete all”. Press “Select”; the
question “Delete all numbers?” is shown.
3 Press “Yes” (“No” will take you back one step); “All numbers deleted” is shown.
The handset will automatically return to stand-by mode.
8.4 Services
1 Enter the menu by pressing the “Menu” Soft key, or the Navigation key or .
2 Mark the Services icon. Press “Select”; a list with all created Services is shown.
Figure 20.
021
Figure 12. The Services icon is marked.
8.4.1 Activate a Service
1 Mark the Services icon and press “Select”.
2 Mark the Service you want to activate. Press “Select”; the service will be activated.
If data is sent, the text “Sending” is shown. The handset will automatically return to
the list and the selected service is marked.
8.4.2 Create a new Service
1 Mark the Services icon and press “Select”.
2 Press “Add”; “Name:” will appear. The handset is in text input mode and the name
can now be added.
Note: If any services already have been created, you will have to press “Options” first,
then select “Add service” and press “Select”.
3 Enter a name that describes the service you want to add, for example, if you want
this service to open a door, then name it “Open door”.
4 Press “Save”; the new name is marked and added to the list.
5 Select “Function:Not used”.
6 Press “Select” to enter functions. The functions available are; Data send, Data with
prefix, Phone call, and Text message.
7 Choose the function you want the service to have and press “Select”.
8 Enter data, prefix, phone number, or SMS address and text; press “Select” to save
the setting. The handset will automatically return to the service and the function is
marked.