User's Manual
Table Of Contents
- 1 Introduction
- 2 Descriptions
- 3 Basic Operation
- 3.1 Switch the Handset On/Off
- 3.2 The Call List
- 3.3 Calling
- 3.4 Start a New Call during Conversation
- 3.5 Transfer a Call/Retrieve the Call
- 3.6 “Blind” Transfer
- 3.7 Turn Off Alert Signals at an Incoming Call
- 3.8 Put a Call on Hold/Retrieve the Call
- 3.9 Turn the Mute Mode Off/On during a Call
- 3.10 Loudspeaking Function
- 3.11 Increase/Decrease the Speaker Volume during a Call
- 3.12 Turn Audible Signals On/Off
- 3.13 Lock/Unlock the Keypad
- 3.14 Lock/Unlock the Handset
- 4 Messaging
- 5 Alarm Operation
- 6 Navigate the Menu
- 7 Menu Tree
- 8 Menu Operation
- 8.1 Contacts
- 8.2 Messages
- 8.3 Call List
- 8.4 Services
- 8.5 Settings
- 8.5.1 Change the Volume
- 8.5.2 Change the Ring Signal
- 8.5.3 Vibrator On/Off
- 8.5.4 Key Beep On/Off
- 8.5.5 Deactivate/Activate No-movement alarm
- 8.5.6 Deactivate/Activate Man-down alarm
- 8.5.7 Edit a Soft key
- 8.5.8 Edit a Hot key
- 8.5.9 Select Language
- 8.5.10 Change Text Size in Messages
- 8.5.11 Lock the Handset Manually
- 8.5.12 Change the Lock Code
- 8.5.13 Time and Date Settings
- 8.5.14 Turn On/Off Automatic Keypad Lock
- 8.5.15 Enable/Disable Quick Answer
- 8.5.16 Set New Messages to be Displayed Upside down
- 8.5.17 Set Owner ID
- 8.5.18 Select System
- 8.5.19 System Information
- 8.6 Profiles
- 8.6.1 Change Profiles
- 8.6.2 Change Profile Settings
- 8.6.3 Set the Profile to Absent On/Off
- 8.6.4 Choose the Profile’s Answering method
- 8.6.5 Set the Profile to Divert incoming Calls to another telephone number
- 8.6.6 Preset the telephone numbers for the Diversions alternatives
- 8.6.7 Customizing the Profiles Menu
- 9 Advanced Functions
- 10 Operation Notice
- 11 Maintenance
- 12 Related Documents
- Appendix A: Programming the Handset
- Index
PRELIMINARY
TD 92319GB
2005-10-20/ Ver. PA11
User Manual
i75 Cordless IP Handset
36
2 Mark “System” and press “Select”.
3 Mark “Select system” and press “Select”.
4 Mark the desired system and press “Select”. “System selected” is shown. The
handset will automatically return to the system menu.
Select System Set as a Hot key
If you are often moving between systems, it might be convenient to change system
quickly, therefore you can set this function as a Soft key or Hot key.
To change systems: just press the pre-programmed Soft/Hot key to connect to the next
available VoWLAN system (A, B, C or D).
8.5.19 System Information
It is possible to obtain general information about the handset by doing the following:
1 Mark the Settings icon in the menu. Press “Select”.
2 Mark “System” and press “Select”.
3 Mark “Information”. Press “Select” to view information about:
• ESSID: The ID of the system to which the handset is connected.
• IP: The IP address of the handset assigned by the system.
• MAC: The MAC (hardware) address of the handset. This is stored in the handset
and will always be the same.
• SW version: Here you can see which version of the handset software you have.
Tip: There is a quick access code you can use to enter the information mode directly
without using the menu. The quick access code is *#46#.
8.6 Profiles
1 Enter the menu by pressing the “Menu” Soft key, or the Navigation key or .
2 Mark the Profiles icon and press “Select”.
Figure 23.
020
Figure 14. The Profiles icon is marked
The handset is equipped with ten Profiles. Two profiles are preset at delivery and the
remaining eight profiles are left for the user to define. The preset profiles are “Normal”
and “In charger”.
Normal Profile
The “Normal” profile is the default profile.