User's Manual
Table Of Contents
- 1 Introduction
- 2 Descriptions
- 3 Basic Operation
- 3.1 Switch the Handset On/Off
- 3.2 The Call List
- 3.3 Calling
- 3.4 Start a New Call during Conversation
- 3.5 Transfer a Call/Retrieve the Call
- 3.6 “Blind” Transfer
- 3.7 Turn Off Alert Signals at an Incoming Call
- 3.8 Put a Call on Hold/Retrieve the Call
- 3.9 Turn the Mute Mode Off/On during a Call
- 3.10 Loudspeaking Function
- 3.11 Increase/Decrease the Speaker Volume during a Call
- 3.12 Turn Audible Signals On/Off
- 3.13 Lock/Unlock the Keypad
- 3.14 Lock/Unlock the Handset
- 4 Messaging
- 5 Alarm Operation
- 6 Navigate the Menu
- 7 Menu Tree
- 8 Menu Operation
- 8.1 Contacts
- 8.2 Messages
- 8.3 Call List
- 8.4 Services
- 8.5 Settings
- 8.5.1 Change the Volume
- 8.5.2 Change the Ring Signal
- 8.5.3 Vibrator On/Off
- 8.5.4 Key Beep On/Off
- 8.5.5 Deactivate/Activate No-movement alarm
- 8.5.6 Deactivate/Activate Man-down alarm
- 8.5.7 Edit a Soft key
- 8.5.8 Edit a Hot key
- 8.5.9 Select Language
- 8.5.10 Change Text Size in Messages
- 8.5.11 Lock the Handset Manually
- 8.5.12 Change the Lock Code
- 8.5.13 Time and Date Settings
- 8.5.14 Turn On/Off Automatic Keypad Lock
- 8.5.15 Enable/Disable Quick Answer
- 8.5.16 Set New Messages to be Displayed Upside down
- 8.5.17 Set Owner ID
- 8.5.18 Select System
- 8.5.19 System Information
- 8.6 Profiles
- 8.6.1 Change Profiles
- 8.6.2 Change Profile Settings
- 8.6.3 Set the Profile to Absent On/Off
- 8.6.4 Choose the Profile’s Answering method
- 8.6.5 Set the Profile to Divert incoming Calls to another telephone number
- 8.6.6 Preset the telephone numbers for the Diversions alternatives
- 8.6.7 Customizing the Profiles Menu
- 9 Advanced Functions
- 10 Operation Notice
- 11 Maintenance
- 12 Related Documents
- Appendix A: Programming the Handset
- Index
PRELIMINARY
TD 92319GB
2005-10-20/ Ver. PA11
User Manual
i75 Cordless IP Handset
37
In charger Profile
The “In charger” profile is activated when the handset is placed in the charger and
deactivated when removed; it cannot be manually selected. Your last selected profile is
automatically chosen when the handset is removed from the charger.
User defined Profiles
Eight profiles can be defined and saved by the user. The profiles can, for example, be used
to create a special headset profile with different ring signal volume and automatic answer
of incoming calls. Another example is when several users are sharing the same handset.
Each user can then define his own settings, for example; type of ring signal, volume,
answering method, Soft key settings etc. Note that one has to change to the user defined
profiles manually.
8.6.1 Change Profiles
1 Mark the Profiles icon and press “Select”. A list with all profiles is shown.
2 Mark the Profile you want to change to. Press “Select”; the name of the marked
Profile is shown. The handset will automatically return to the list.
A Soft/Hot key can be programmed to change profiles, see 8.5.7 Edit a Soft key on page
33 for more information.
8.6.2 Change Profile Settings
1 Mark the Profiles icon and press “Select”. A list with all profiles is shown.
2 Mark the Profile in which you want to change the settings and press “Options”.
3 Mark “Edit:” and press “Select”. The handling is then according to the ordinary
settings, see
8.5 Settings on page 31, but you also have the possibility to set Absent
On/Off, choose answering method, give the profile a new name and also divert
incoming calls.
8.6.3 Set the Profile to Absent On/Off
Follow the instructions described in 8.6.2 Change Profile Settings, and view the profile’s
settings. Mark “Absent” and press “Change”; the Absent checkbox is selected/cleared.
8.6.4 Choose the Profile’s Answering method
1 Follow the instructions described in 8.6.2 Change Profile Settings, and view the
profile’s settings. Mark “Answer:” and press “Select”.
2 Choose the answering method you want. Select between; Ordinary, Auto, Loud, or
Auto loud.
• Ordinary; press or the middle Soft key for loudspeaking function.
• Auto; the call is automatically connected.
• Loud; press and the call is connected with loudspeaking function turned on.
• Auto loud; the call is automatically connected with loudspeaking function
turned on.
3 When you have chosen type of answering method, press “Select”; the name of the
selected method is shown. The handset will automatically return to the list and the
new answering method is marked.