User's Manual
Table Of Contents
- 1 Introduction
- 2 Descriptions
- 3 Basic Operation
- 3.1 Switch the Handset On/Off
- 3.2 The Call List
- 3.3 Calling
- 3.4 Start a New Call during Conversation
- 3.5 Transfer a Call/Retrieve the Call
- 3.6 “Blind” Transfer
- 3.7 Turn Off Alert Signals at an Incoming Call
- 3.8 Put a Call on Hold/Retrieve the Call
- 3.9 Turn the Mute Mode Off/On during a Call
- 3.10 Loudspeaking Function
- 3.11 Increase/Decrease the Speaker Volume during a Call
- 3.12 Turn Audible Signals On/Off
- 3.13 Lock/Unlock the Keypad
- 3.14 Lock/Unlock the Handset
- 4 Messaging
- 5 Alarm Operation
- 6 Navigate the Menu
- 7 Menu Tree
- 8 Menu Operation
- 8.1 Contacts
- 8.2 Messages
- 8.3 Call List
- 8.4 Services
- 8.5 Settings
- 8.5.1 Change the Volume
- 8.5.2 Change the Ring Signal
- 8.5.3 Vibrator On/Off
- 8.5.4 Key Beep On/Off
- 8.5.5 Deactivate/Activate No-movement alarm
- 8.5.6 Deactivate/Activate Man-down alarm
- 8.5.7 Edit a Soft key
- 8.5.8 Edit a Hot key
- 8.5.9 Select Language
- 8.5.10 Change Text Size in Messages
- 8.5.11 Lock the Handset Manually
- 8.5.12 Change the Lock Code
- 8.5.13 Time and Date Settings
- 8.5.14 Turn On/Off Automatic Keypad Lock
- 8.5.15 Enable/Disable Quick Answer
- 8.5.16 Set New Messages to be Displayed Upside down
- 8.5.17 Set Owner ID
- 8.5.18 Select System
- 8.5.19 System Information
- 8.6 Profiles
- 8.6.1 Change Profiles
- 8.6.2 Change Profile Settings
- 8.6.3 Set the Profile to Absent On/Off
- 8.6.4 Choose the Profile’s Answering method
- 8.6.5 Set the Profile to Divert incoming Calls to another telephone number
- 8.6.6 Preset the telephone numbers for the Diversions alternatives
- 8.6.7 Customizing the Profiles Menu
- 9 Advanced Functions
- 10 Operation Notice
- 11 Maintenance
- 12 Related Documents
- Appendix A: Programming the Handset
- Index
PRELIMINARY
TD 92319GB
2005-10-20/ Ver. PA11
User Manual
i75 Cordless IP Handset
39
9 Advanced Functions
9.1 System Handling
9.1.1 Register a New VoWLAN System
You can register up to four different VoWLAN systems on your handset. To register you
have to enter the authentication code related to the system you are logging on to.
When you have registered more than one system, you can manually select which system
to connect to, see
8.5.18 Select System on page 35.
9.2 Field Upgrade
The firmware in the i75 Cordless IP Handset can be upgraded by using the USB
Programming Device connected to a computer. The USB programming device consists of a
cradle, similar to the Desktop Charger, connected to a computer with a USB cable.
See Appendix A: Programming the Handset on page 45.