User's Manual

TD 92082GB
PRELIMINARY
7 May 2012 / Ver. PB7
Installation Guide
LF Location Units
9
3.1.4 L951A2/2 Antenna Unit
Depth of
circuit board
with components
Minimum hole diameter
for flush mounting
70
30
Figure 9. Mounting dimensions in mm.
The Antenna Unit L951A2/2 is for flush mounti
ng. See figure 9 for mounting dimensions.
Fasten the holders to the circuit board.
Figure 10. Fastening of holders to L951A2/2 circuit board.
Remove the protecting film from the double sid
ed sticky tape and fasten the antenna on the
desired surface.
NOTE: L951A2/2 must be mounted with the ferrite antenna i
n vertical orientation to
achieve maximum coverage.