User's Manual

TD 92082GB
PRELIMINARY
7 May 2012 / Ver. PB7
Installation Guide
LF Location Units
10
3.1.5 L951PA Power Amplifier
138
150
60 100
Figure 11. Mounting dimensions for L951PA in mm.
1 Fasten the case on the desired surface with four screws, see figure 11 for mounting
dimensions.
IMPORTANT: L951PA m
ust be mounted to a vertical wall. No cable entries must be directed
downwards.
NOTE: When the case of the L951PA are put together, make sure that the reed relay and the
t
amper protection magnet are placed opposite to each other.
3.1.6 L951TP Transient Protection Unit
90 mm
110 mm
Figure 12. Mounting dimensions for L951TP in mm.
1 Open the plastic case by removing the four screws on the cover plat
e.
2 Fasten the back plate of the case on the desi
red surface with four screws, see 
figure 12 for mounting dimensions. Mount the case with th
e cable entries
downwards.