User's Manual

Connectors
J01: Input signal from driver.
Jumpers
S05: If the tamper protection is to be disabled, a jum
per should be placed on
pins 1 and 2.
If the tamper protection is active, the cover plate m
ust be in place for the
Locator to function.
Switches
SW01: Reed relay – for tamper protection
TD 92082GB
PRELIMINARY
7 May 2012 / Ver. PB7
Installation Guide
LF Location Units
5
2.3 L951A2 and L951A2/2 Antenna Units
12
J1
Figure 4. Circuit board L951A2 and L951A2/2 Antenna Units.
Connectors
J1: Input signal from driver.