User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 97
Installation Guide
teleCARE IP
6.12.12 Assembling and Attaching the Pull Cord
It is important to assemble and attach the pull cord to the pull switch module correctly to ensure the
cord is securely attached and that the “safety break” mechanism works reliably. The following
illustrations show how to prepare the pull cord:
Figure 127. Assembling and attaching the pull cord
6.13 Duty Selector (NIDS)
Figure 128. Duty Selector front and back view
The Duty Selector is an auxiliary peripheral which can be connected to any one of the three room
buses from the room controller. It has a fixed address number 5 on the room bus which cannot be
changed.
It has the same basic housing as the teleCARE IP switch modules but it must be mounted on a surface
mounting spacer which is delivered with the Duty Selector (see 6.3.2, Surface Mounting Spacer on
page 63 for details).
150 mm
min.
2000 mm
max.
150 mm
min.
click!
1
2
3
6 in. min
(150 mm)
6 in. min
(150 mm)
6.5 ft. max.
(2000 mm)