User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 114
Installation Guide
teleCARE IP
television interface module is connected to the “Audio” connector of the NIBM2 bedside module.
Figure 152. Television audio connections
WARNING: The equipment that is connected to this interface is not considered to be part of the
teleCARE IP system UL listing.
The handset NIPH-AES is required to listen to the TV audio. The audio can be broadcasted through the
speaker of the handset or listened to through stereo headphones plugged into the jack socket in the
cable of the handset.
General Considerations
• The maximum audio input voltage is 2Vp-p.
• The maximum audio input impedance is 2k ohms.
6.17.1 Television Interface Module Electrical Connections
Figure 153. Television interface module electrical connections
J3: Not used.
J1: TV Stereo
Audio Input from
the Television
Headphone Jack
Socket
J2: TV Stereo Audio
Output to the
teleCARE IP