User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 161
Installation Guide
teleCARE IP
9.5 4-Bed Room with Speech
The installation of a teleCARE IP system with speech is basically the same as without speech except
that the teleCARE IP Speech Module is added at each active peripheral where speech communication
is required.
The speech module can only be used in combination with the following active teleCARE IP peripherals:
the door side module (NIDM), the bedside module (NIBM), the medial rail socket, active pull cord
module (NIPC-XXA), and the room display (NIRD).
The example shown consists of one room controller with integrated corridor lamp to which only active
peripherals are connected. The room controller handles the speech communication and all the
signaling of the related room. Each bed location has a speech module.
Figure 181. 4-bed room with speech
Ethernet LAN
24Vdc Power Supply Bus
Room Bus 0
Room Bus 1
Address 0
Address 1
Address 2
Address 1
Address 2
Address 4
Address 0
Room Controller
(Corridor Lamp)