User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 55
Installation Guide
teleCARE IP
Figure 67. LED through-board connectors and guide marks
For full details of the LED lamp boards refer to section 5.6, LED Lamp Boards, page 43.
5.7.9 Connecting the LED Lamp Boards
To connect the LED lamp board, insert the three pins of the LED lamp board into the appropriate three
holes in the back side of the corridor lamp PCB.
Figure 68. Plugging LED lamp board into the corridor lamp PCB
With the three pins inserted and the LED lamp board lined up with the guide marks, firmly press the
LED lamp board into the corridor lamp PCB. Repeat the procedure on the other required LED lamp
boards.
LED Lamp Board
Guide Marks
Through-Board Connection Holes
for the LED Lamp Boards
Insert the Pins of the LED Lamp Board in
the Holes in the corridor lamp PCB
Align the LED Lamp Board
with the Guide Marks on
the corridor lamp PCB