User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 96
Installation Guide
teleCARE IP
Figure 125. Mounting the switch module on the backplate
Press the pull cord module on to the backplate (making sure that the latch fasteners stay engaged)
and carefully tighten the two fixing screws. The screws should be tightened to apply just enough
pressure on the gasket to compress it evenly all around between the cover plate and the backplate.
Figure 126. Tightening the pull cord fixing screws
Caution: Do not excessively tighten the fixing screws as this will distort the cover plate and
the foam gasket resulting in an ineffective waterproof seal.