User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 109
Installation Guide
teleCARE IP
The backplate must be fixed to the wall using the four corner holes (indicated in the drawing below by
red circles).
Figure 143. Mounting the room display backplate
The backplate has an arrangement of fixing holes (indicated in the drawing above by blue circles)
which make it suitable for mounting on various international back boxes.
Caution: Even when the backplate is mounted on a back box it must also be fixed to the wall
with the corner holes.
6.16.5 Room Display Combined with the Speech Module
The NIRD can be combined with the NISP Speech Module in teleCARE IP systems with speech. The
NIRD is used to select calls, control voice communication and cancel calls. The NISP facilitates two-way
voice communication via a press-to-talk function on the NIRD.
= Essential
= Optional
CAUTION!
DO NOT MOUNT THE
ROOM DISPLAY
CLOSE TO OR OVER
METAL OBJECTS.
There must be a
minimum distance of 1
in (30mm) in all
directions between the
room display and any
metal objects to avoid
the degradation of the
card reader antenna
performance.