User's Manual
TD 93021US Rev A
10 FEB 2014 / Ver A 111
Installation Guide
teleCARE IP
Figure 146. Inserting the connection cable through the backplate
Note: Make sure that the cable lies in the recess under the strip in the middle of the 
backplate to avoid trapping the cable under the backplate when it is screwed to the wall.
The backplate must be fixed to the wall using the four corner holes and the two holes in the middle of 
the backplate (indicated in the drawing below by red circles).
Figure 147. Mounting the room display long backplate
The backplate has an arrangement of fixing holes (indicated in the drawing above by blue circles) 
which make it suitable for mounting on various international back boxes.
CAUTION!
DO NOT MOUNT THE 
ROOM DISPLAY
CLOSE TO OR OVER 
METAL OBJECTS.
 There must be a 
minimum distance of 1 
inch (30mm) in all 
directions between the 
room display and any 
metal objects to avoid 
the degradation of the 
card reader antenna 
performance.
= Essential
= Optional










