User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 112
Installation Guide
teleCARE IP
Caution: Even when the backplate is mounted on a back box it must also be fixed to the wall
with the corner holes and the middle holes.
When the backplate is screwed to the wall connect the NISP and snap fit it to the backplate.
Figure 148. Connecting the NISP and mounting it on the backplate
Next connect the NIRD room display to the NISP and plug in the room bus connector.
Figure 149. Connecting the NIRD to the NISP and connecting the room bus
Refer to 6.16.1, Room Bus Electrical Connections on page 107 for full details.