User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 90
Installation Guide
teleCARE IP
Figure 113. Positioning the back box on a tiled wall
6.12.3 NIPC2 Back plate
The NIPC2 back plate has a urethane foam gasket on both sides to prevent water entering the pull
cord module. With the NIPC2 switch module mounted correctly on the back plate the switch module
conforms to the ingress protection rating of IP44.
Figure 114. NIPC2 backplate
6.12.4 Mounting the NIPC2 Backplate
The backplate of the NIPC2 must be mounted over the back box using the holes in the corners of the
backplate in order to ensure that the NIPC2 is IP44 splash water proof.