User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 84
Installation Guide
teleCARE IP
Note: The 4-pole connector terminals required for the room bus connections is not supplied
with the switch module. It is available as accessories and must be ordered separately.
6.8.2 Assembling and Attaching the Pull Cord
It is important to assemble and attach the pull cord to the pull switch module correctly to ensure the
cord is securely attached and that the “safety break” mechanism works reliably. The following
illustrations show how to attach the pull cord:
Figure 104. Assembling and attaching the pull cord
6.9 Toilet Cancel Module - Active (NITC-XXA)
Figure 105. Toilet cancel module (active)
The Toilet Cancel Module is designed for use in the teleCARE IP system. It is a wall mounted single
switch module used to cancel toilet calls made by linked toilet call devices.
Each room bus offers individual addresses for up to four switch modules. The address is of the active
toilet cancel module is fixed at number 4 and cannot be changed.
The toilet cancel module requires a single backplate which must be ordered separately. The backplate
enables this switch module to be mounted over different types of back-boxes. Alternatively, a spacer
with installation kit is available for surface mounting.