System Description

TD 93025US
9 May 2019 / Ver. I 81
System Description
teleCARE IP
Active Location Beacon
When dynamic mode NILF beacons are used the NISP telephone number will be updated
and the speech location will change to the new location if the NITX subsequently moves
between locations after a call is received.
Speech Handling Overview
The table below shows the speech handling based on their static or dynamic location mode
setting in combination with passive or active location beacons.
The wireless staff call examples described in the following sections are based on wired
teleCARE IP with wireless functionality using base stations (NIRC3 + NIRX).
However it is also possible to use the wireless infrastructure using wireless repeaters for all
except the wander control examples. Since wander control combined with access control
requires hard wired modules like the card reader (NICR) and the room controller (NIRC3) to
control the locking or opening of doors, a base station (NIRC3 + NIRX) would be the
preferred configuration.
Transceiver
Location
mode
LF beacon
mode
Location at
the start of
a new call
Speech location change update
Before
speech
During
speech
After
speech
Static NA
Configured
location
No No No
Dynamic
Passive Last known No No No
Active Last known Yes No No