System Description

TD 93025US
9 May 2019 / Ver. I 83
System Description
teleCARE IP
9.9.1 Static or Dynamic Locations
The teleCARE IP Wireless Transceivers can be programmed to operate in a static or dynamic
location environment.
Static Location
When using a static configuration for the wireless device, speech will always be towards the
phone number that is assigned to the (home) location. With a corded phone speech will
only be possible if the resident is present at the home location. However if the resident is
carrying a cordless phone, for example a GSM, he or she can still be reached even if they
are not present at their home location. This is also partially applicable for DECT and Wifi,
however note that DECT and Wifi have a limited range.
Figure 76. Static location example
Note: Be aware that the range of the NITX is also limited based on the coverage area of the
wireless system. Therefore a resident call from an NITX might not be coming through when
being outside of the coverage area.
Dynamic Location
Dynamic locations should only be used if there are active location beacons installed which
will update the location of a resident whenever he or she passes such a location. If a phone
(number) is assigned to that location, the interactive messaging “Speech” option sent to
the caregiver will use the phone number. If no phone number is assigned to the location,
the phone number of the resident’s home location will be used.