System Description

TD 93025US

9 May 2019 / Ver. I 101

System Description

teleCARE IP

11 System Monitoring

The teleCARE IP system continuously monitors the state of any connected devices. The monitoring is

performed on three levels:

• UNITE server level - As part of the UNITE system the UNITE CM module continuously monitors the

state of the System Manager (NISM) and the Integrated Message Server (IMS).

• teleCARE IP controllers level - The NISM monitors all room controllers.

• Peripherals level - The teleCARE IP controllers (NIRC3) monitor the state of all connected active

peripherals. Peripherals are monitored for line breaks and hardware malfunctioning.

Faults that are detected at peripherals level are also signaled by the related NIRC3 or on a NICL2

corridor lamp, see See “Room Controller (NIRC3)” on page 15., or Corridor Lamp (NICL2), see

See “Corridor Lamp (NICL2)” on page 18.

All detected faults are transmitted and reported to the UNITE CM module, from where the faults are

further handled. The example in the illustration below shows the UNITE CM module connected to a

PC which logs any faults which the UNITE CM detects.

Figure 84. UNITE CM monitoring the system with logging of system faults by a PC

Admin

Unite

Modules

Portable

Devices

UCM

NISM2

IMS

NIRC3

DHCP

PC for Logging

of System Faults

teleCARE IP

Peripherals

teleCARE IP

Peripherals