System Description

TD 93025US
9 May 2019 / Ver. I 102
System Description
teleCARE IP
12 Installation Examples
12.1 General
The teleCARE IP room controller has three room buses and typically these can be arranged to serve:
• One Room
In this basic installation all three room buses and any connected peripherals are applied in one and
the same room. The signaling of the room is handled by one corridor lamp which is typically
integrated into the room controller.
• Three Rooms
In this master-slave installation each of the three room buses and any connected peripherals are
dedicated to a separate room. The signaling of the rooms is handled by three corridor lamps; one
for each room. In this architecture two of the corridor lamps connect as slaves to the room
controller which typically has an integrated corridor lamp.
12.2 Basic Installation Without Speech
The basic installation of a teleCARE IP system without speech consists of one room controller with
integrated corridor lamp to which only active peripherals
are connected. The room controller handles all the signaling of the related room.
Figure 85. Basic system installation without speech
Note: In a basic configuration the system power supply can be provided by one or more
external power supply units. See
“24Vdc / 3 Amp Power Supply (Standard)” on page 14 for
details.