System Description

TD 93025US
9 May 2019 / Ver. I 106
System Description
teleCARE IP
12.6 Installation With Speech at Each Bed
The installation of a teleCARE IP system with speech is basically the same as without speech except
that the teleCARE IP Speech Module is added at each active peripheral where speech communication
is required.
The speech module can only be used in combination with the following active teleCARE IP peripherals:
the doorside module (NIDM), the bedside module (NIBM) and the pull cord module (NIPC).
The example shown consists of one room controller with integrated corridor lamp to which only active
peripherals are connected. Each bed location has a speech module. The room controller handles the
speech communication and all the signaling of the related room.
Also shown in this example is the possibility of installing the speech module at the doorside module.
Figure 89. Basic system installation without speech
Note: In a configuration with speech the system power supply can be provided by one or
more external power supply units. See
“24Vdc / 3 Amp Power Supply (Standard)” on page 14 for
details.